The Cat® 340 UHD provides optimum machine solutions for building demolition up to 8 stories. With its unique coupling system, you can switch between two lengths of Ultra High Demolition fronts and two types of Retrofit booms and sticks with no special tools in 15 minutes. You simply won’t find a better 50-ton class choice for demolition..
Features
-
LATEST FEATURES
Machine Setup Simplification
- At the touch of fingertips and navigating user-friendly icons, the latest operator oriented User Interface (UI) maximizes uptime and gets crews to work without delay. From re-ordering work tool lists to creating new work tool combinations as needed, operators can quickly set up machines and easily access information.
- The interface allows operators to maintain accuracy and makes the most of every second of their shift. Adding the ability to input couplers and attachments into the system makes setting up work tool combinations highly efficient by significantly reducing calibration time. It also eliminates the need to measure up again when changing Cat® work tool attachments and makes it manageable for a single person to check and adjust for bucket wear.
Cat Payload and Advanced Payload
- Cat Payload provides operators with on-the-go weighing to help them hit load targets and avoid overloading, underloading, or misloading materials. Advanced Payload is a system upgrade that offers expanded features and capabilities, including custom tags, daily totals, and electronic ticketing. Combine Payload with VisionLink® Productivity* to analyze jobsites and individual assets for remote management of production targets and key metrics.
* VisionLink® subscription required.
Not all features are available in all regions. Please check with your local Cat dealer for specific offering availability in your area. Build Number: 08D
-
High Performance
- UHD can reach up to 18.6m (60 ft 11 in) of working vertical pin height, using a 3.7 ton (8,157 lbs) tool with 11.7m (38 ft 4 in) horizontal reach.
- Cat active stability monitoring system continuously informs operators of work tool position within the safe working range and warns when approaching the stability limit.
- Hydraulically actuated variable gauge undercarriage provides outstanding stability extended to 4000 mm (13 ft); it retracts to 3000 mm (10 ft) to make transportation easier.
- Standard rearview and right-hand sideview cameras give clear views on the monitor.
- The C9.3B engine can run on biodiesel up to B20 and meets EU Stage V, U.S. EPA Tier 4 Final, and Japan 2014 emission standards.
- Match the excavator to the job with three power modes – Power, Smart, and ECO. Smart mode automatically matches engine and hydraulic power to working requirements, providing maximum power when needed and reducing power when it isn’t to help save fuel.
- The high-efficiency hydraulic reversing fan cools the engine on demand to help reduce fuel consumption.
- Cat technologies increase operating efficiency to lower operator fatigue, operating costs, and fuel consumption.
-
Work in Comfort
- Demolition cab with standard Operator Protective Guards (OPG) includes front and roof of P5A
10 mm (0.4”) laminated glass. - Tilt-up 30° for a more productive and comfortable sight line.
- The windshield and roof one-piece parallel wipers with three intermittent settings include washer spray.
- Premium heated and cooled seat is standard.
- Get in and out of the cab easier using the tip-up left console.
- Control the excavator comfortably with easy-to-reach controls all located in front of you.
- Stow your gear with plenty of in-cab storage beneath and behind the seat, overhead, and in the consoles.
- Use the standard radio’s USB ports and Bluetooth® technology to connect personal devices and make hands-free calls.
- Demolition cab with standard Operator Protective Guards (OPG) includes front and roof of P5A
-
Simple to Operate
- Start the engine with a push button; use a Bluetooth® key fob or the unique Operator ID function.
- Program each joystick button, including power mode, response, and pattern, using Operator ID; the machine will remember what you set each time you go to work.
- Automatic hydraulic oil warmup gets you to work faster in cold temperatures and helps prolong the life of components.
- Navigate quickly on the high-resolution 254 mm (10 in) touchscreen monitor or with the aid of the jog dial control.
- Make moving the excavator much easier with Cat Stick Steer. Simply push a button and use one hand to travel and turn instead of both hands or feet on levers or pedals.
- Not sure how a function works or how to maintain the excavator? Always have the operator’s manual at your fingertips in the touchscreen monitor.
-
Boost Efficiency and Productivity with Cat Technology
- The latest operator oriented User Interface (UI) has been designed to maximize uptime by allowing operators to easily reorder work tool lists and quickly create new work tool combinations. It also eliminates the need to measure up again when changing Cat® work tool attachments and makes it manageable for a single person to check and adjust for bucket wear.
- Standard Cat Grade with 2D with a retrofit boom indicates depth and slope on the monitor with auditory alerts.
- Cat Payload onboard weighing helps you achieve precise load targets to improve your operating efficiency with a retrofit boom. Pick up a load of material – with either a bucket or grapple – and get a real-time weight estimate without even swinging.
- Combine Payload with VisionLink® and remotely manage your production targets. The monitor’s USB port lets you download results from one shift all the way up to 30 days of work, so you can manage your progress without needing an internet connection or VisionLink subscription.
- The stability monitoring system continuously informs operators of work tool position within the safe working range and warns when approaching the stability limit.
- Know the excavator’s exact position relative to GPS and GLONASS systems. The machine automatically compensates for excavator pitch and roll caused by sloping ground conditions.
- VisionLink provides actionable data insights for all assets – regardless of fleet size or equipment manufacturer.* Review equipment data from your desktop or mobile device to maximize uptime and optimize assets. Dashboards provide information such as hours, miles, location, idle time, and fuel utilization. Make informed decisions that lower costs, simplify maintenance, and improve safety and security on your jobsite.
- VisionLink Productivity gathers and summarizes machine telematics and jobsite data from all your equipment – regardless of the manufacture.* View actionable information such as idle time, fuel burn, location, payload, load counts, total cycles, and more to improve machine efficiency, productivity, and utilization. Access data anywhere via a mobile, tablet, or desktop device – on or off the jobsite.
- Remote Flash is a mobile application that allows you to update onboard software without a technician being present, allowing you to initiate software updates when convenient, increasing your overall operating efficiency.
*Data field availability can vary by equipment manufacturer.
-
Easy Maintenance
- Enjoy low maintenance cost due to extended service intervals.
- Check hydraulic system oil and easily drain fuel system water and fuel tank water from ground level.
- Track your excavator’s filter life and maintenance intervals via the in-cab monitor.
- Change all fuel filters at a synchronized 1,000 hours. Oil and fuel filters are grouped and located on the right-hand side of the machine for easy maintenance.
- The engine air intake filter with pre-cleaner has double the dust holding capacity of the previous air intake filter.
- The hydraulic oil filter provides improved filtration; anti-drain valves keep oil clean when the filter is replaced.
- Boost productivity with proactive service reminders. The Integrated vehicle health management system alerts the operator with step-by-step service guidance along with parts needed so you don’t experience any unnecessary downtime.
- S•O•SSM ports simplify maintenance and allow for quick, easy extraction of fluid samples for analysis.
-
Dedicated Service and Superior Support
When you buy Cat® equipment, you get more than the machine. You’re also getting the support of a best-in-class dealer network backed by a range of flexible solutions, technology, tools, and more.
When you work with your local Cat dealer, you’ll be supported by one of the industry’s most extensive, knowledgeable dealer networks. Comprised of 160 independent dealers, the Cat Dealer Network serves 197 countries with thousands of branches around the globe.
It’s more uptime, cost-saving service and repair options, quality parts, and precision components. It’s all about support built around your success.
Ask your Cat dealer today about the many services that help you do your work your way.
- The importance of buying genuine Cat parts.
- Designed by Caterpillar engineers to the exact specs of your Cat equipment.
- Rigorously tested to ensure maximum performance.
- Covered by a 12-month warranty.
- Cat Inspect – Work made easy.
- Record real-time inspection data.
- Simplify inspections and reporting.
- Easy-to-read results all in one place.
- Cat Ground Engaging Tools (GET) – Longer wear. More work.
- GET for every machine and application.
- Tools to extend life and track GET lifecycles.
- Bucket rebuild options for optimal performance.
- Cat Hydraulic Components – Durability quality you can work with.
- Flexible options – New, reman, exchange, rebuild or repair.
- Expert diagnostics, testing, and contamination control.
- Buy in-store, online, or on your mobile device.
- Cat Hose Service – Fast, safe—to get you back to work.
- Hoses and couplings for most makes and models.
- OEM database ensures an exact fit.
- Industry-best tooling, training, and assembly standards.
- Cat Certified Rebuild – An investment that works. Again, and again.
- Better-than-when-new performance at a fraction of the cost.
- Performance, safety, and technology upgrades and enhancements.
- Full warranty coverage, Customer Value Agreement, and special financing.
- Cat Remote Services – Work done in a flash.
- Cut downtime for updates and service.
- Install the latest machine software remotely.
- Troubleshoot issues before a technician arrives.
24/7 Expert Support
Get industry-leading support for any question or problem you have 24 hours a day, 7 days a week, 365 days a year.CALL US
We’re available 24/7 at
Toll Free:1-888-228-1460
Direct:1-513-830-1806
SMS:+13098656129Learn more at https://parts.cat.com/
-
Safely Home Every Day
- On-board stability monitoring helps the operator enhance job safety.
- A travel direction indicator helps the operator know which way to activate the travel levers.
- Enjoy greater visibility in each swing direction with the help of narrow cab pillars and large windows.
- A ground-level shutoff switch stops all fuel to the engine when activated and shuts down the machine.
- Rearview and right-hand sideview cameras are standard.
- Serrated steps and an anti-skid punch plate on the service platform help prevent slipping.
- Standard 2D E-Fence (swing) helps you avoid swinging into obstacles to the side of the machine such as live traffic and structures.
-
Sustainability
- The Cat® C9.3B engine meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards.
- Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrogenated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.
- Auto Engine Speed Control helps reduce unnecessary fuel burn and greenhouse gas emissions by allowing the engine to automatically go into idle mode when the machine is not working.
- Cat Grade technologies combine advanced guidance with optional automated machine control helping you reach grading targets while reducing fuel burn and greenhouse gas emissions by improving efficiency, job site productivity, and accuracy.
- Cat® Payload for excavators provides on-the-go material weighing which helps reduce fuel burn by improving loading efficiency, job site productivity, and eliminating trips to the scale.
- Cat® 2D E-fence keeps the front linkage within a predefined work area to avoid hazards such as traffic – not only helping keep personnel safe but also helps you avoid repairs, downtime, and costly job site fines.
- Extended maintenance intervals not only reduce downtime but decrease the amount of fluid and filters that are replaced over the life of the machine.
- Remote Flash minimizes downtime and maintenance time while keeping your asset running with maximum efficiency. Alerts for machine updates are sent virtually from your Cat dealer and updates can be deployed without a dealer technician needing to be onsite.
*Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer).
**Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.
Specifications
Units for specifications
Engine
Engine Model | Cat C9.3B |
---|---|
Net Power - ISO 9249 | 346 hp 258.3 kW |
Engine Power - ISO 14396 (DIN) | 352 hp (metric) 352 hp (metric) |
Net Power - ISO 9249 (DIN) | 351 hp (metric) 351 hp (metric) |
Engine Power - ISO 14396 | 347 hp 259 kW |
Bore | 5 in 115 mm |
Stroke | 6 in 149 mm |
Displacement | 568 in³ 9.3 l |
Biodiesel Capability | Up to B20¹ |
Emissions | Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. |
Note (1) | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 1,900 rpm. Advertised power is tested per the specified standard in effect at the time of manufacture. |
Note (2) | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels.Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. *Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer). **Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels. |
Hydraulic System
Main System - Maximum Flow | 560 l/min (148 gal/min) |
---|---|
Maximum Pressure - Equipment | 5076 psi 35000 kPa |
Maximum Pressure - Equipment - Lift Mode | 5511 psi 38000 kPa |
Maximum Pressure - Travel | 5076 psi 35000 kPa |
Maximum Pressure - Swing | 4264 psi 29400 kPa |
Swing Mechanism - UHD Fronts
Swing Speed | 4.09 r/min 4.09 r/min |
---|
Swing Mechanism
Swing Speed | 8 r/min 8 r/min |
---|---|
Maximum Swing Torque | 105000 lbf·ft 143 kN·m |
Weights
Operating Weight | 122600 lb 55600 kg |
---|---|
Note (1) | Hydraulic Variable Gauge undercarriage, 25 m (72'2") UHD front, 600 mm (24") Heavy Duty (HD) triple grouser shoes and 9.0 mt (19,842 lb) counterweight. No work tool. |
Machine Weight - Retrofit Configuration | 118600 lb 53800 kg |
Note (2) | Hydraulic Variable Gauge undercarriage, Retrofit boom, R3.2DB (10'6") stick, General Duty (GD) 2.27 m³ (2.97 yd³) bucket, 600 mm (24") HD triple grouser shoes and 9.0 mt (19,842 lb) counterweight. |
UHD in Cradle | 18700 lb 8480 kg |
Retrofit Boom in Cradle - R3.9 DB Stick | 13710 lb 6220 kg |
Retrofit Boom in Cradle - R3.2 DB Stick | 13340 lb 6050 kg |
Retrofit Boom in Cradle - R2.8 DB Stick | 13120 lb 5950 kg |
2-Piece Retrofit Boom in Cradle - R3.2 DB Stick | 17440 lb 7910 kg |
Service Refill Capacities
Fuel Tank Capacity | 158.5 gal (US) 600 l |
---|---|
Cooling System | 10.5 gal (US) 40 l |
Engine Oil | 8.5 gal (US) 32 l |
Swing Drive | 4.8 gal (US) 18 l |
Final Drive - Each | 2.1 gal (US) 8 l |
Hydraulic System - Including Tank | 145.3 gal (US) 550 l |
Hydraulic Tank | 42.5 gal (US) 161 l |
DEF Tank | 21.1 gal (US) 80 l |
Dimensions
Note (1) | 22 m (72'2") UHD Front |
---|---|
Shipping Height - Top of Cab | 11.1 ft 3383 mm |
Cab Height - With OPG | 11.8 ft 3585 mm |
Shipping Length | 49.8 ft 15160 mm |
Tail Swing Radius | 11.6 ft 3521 mm |
Counterweight Clearance | 4.6 ft 1397 mm |
Ground Clearance | 1.7 ft 510 mm |
Track Length | 18.9 ft 5770 mm |
Track Length to Center of Rollers | 15.7 ft 4770 mm |
Working Gauge - Extended Position | 11.2 ft 3400 mm |
Shipping Gauge - Retracted Position | 7.8 ft 2400 mm |
Transport Width | 10.7 ft 3255 mm |
Machine Length - without Front, with Counterweight | 23.3 ft 7077 mm |
Machine Length - without Front and Counterweight | 22.8 ft 6954 mm |
Track Width - Extended | 13.1 ft 4000 mm |
Track Width - Retracted | 9.8 ft 3000 mm |
Note (2) | 600 mm (24") Track Shoes |
Working Ranges and Forces
Maximum Pin Height at Stick Nose | 72.2 ft 22 m |
---|---|
Maximum Weight at Stick Nose | 8160 lb 3700 kg |
Maximum Working Pin Height at Stick Nose - 1/2 | 61 ft 18590 mm |
Maximum Working Reach at Stick Nose - 1/2 | 38.4 ft 11680 mm |
Maximum Height at Stick Nose in Max Reach Position | 41.5 ft 12640 mm |
Maximum Reach at Stick Nose | 44.4 ft 13550 mm |
Note (1) | 22 m (72' 2") UHD Front (Over-the-Front) |
Working Ranges and Forces - Retrofit Boom - Straight
Note 1 | Straight - R3.2DB m (10' 6") Stick (Over-the-Front) - HVG Undercarriage |
---|---|
Bucket | GD 2.27 m³ (2.97 yd³) |
Maximum Pin Height at Stick Nose | 39.8 ft 12.13 m |
Maximum Weight at Stick Nose | 9260 lb 4200 kg |
Maximum Height at Stick Nose in Max Reach Position | 7.6 ft 2310 mm |
Maximum Reach at Stick Nose | 34.8 ft 10620 mm |
Maximum Digging Depth | 16.1 ft 4910 mm |
Maximum Reach - Ground Level | 39.9 ft 12160 mm |
Maximum Loading Height | 34 ft 10370 mm |
Minimum Loading Height | 15.8 ft 4790 mm |
Bucket Digging Force - ISO | 47160 lbf 210 kN |
Stick Digging Force - ISO | 37300 lbf 166 kN |
Working Ranges and Forces - Retrofit Boom - Bent
Note 1 | Bent - R3.2DB (10'6") Stick - HVG Undercarriage |
---|---|
Bucket | GD 2.27 m³ (2.97 yd³) |
Maximum Digging Depth | 21.4 ft 6520 mm |
Maximum Reach - Ground Level | 36.7 ft 11180 mm |
Maximum Cutting Height | 35.4 ft 10790 mm |
Maximum Loading Height | 24.9 ft 7600 mm |
Minimum Loading Height | 10.4 ft 3180 mm |
Bucket Digging Force - ISO | 47160 lbf 210 kN |
Stick Digging Force - ISO | 37300 lbf 166 kN |
Air Conditioning System
Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg (2.2 lb) of refrigerant which has a CO2 equivalent of 1.430 metric tonnes (1.576 tons). |
---|
Standard Equipment
NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
CAB
- Tilt-up demolition cab with P5A laminated front and roof glass
- High-resolution 254 mm (10") LCD touchscreen monitor
- Heated and cooled seat with automatic adjustable suspension
- Bluetooth® integrated radio
- Auto bi-level air conditioner
- Jog dial and shortcut keys for monitor control
- Keyless push-to-start engine control
- Height-adjustable console
- Tilt-up left-side console
- Cat Stick Steer
- Auxiliary relay
- Tilt rocker switch
- Sky wiper switch
- LED interior lights
- Roller front sunscreen
- P5A fixed windshield
CAT TECHNOLOGY
- VisionLink®
- Remote Flash
- Cat Grade with 2D
- Cat Payload
ELECTRICAL SYSTEM
- Maintenance-free 1,000 CCA batteries (x 4)
- Centralized electrical disconnect switch
- LED lights - 1,800 lumens
ENGINE
- Three selectable modes: Power, Smart, ECO
- Auto engine speed control
- Up to 4500 m (14,760 ft) altitude capability
- Reversing fan
- 52° C (126° F) high-ambient cooling
- -18° C (0° F) cold start capability
- Double element air filter with integrated pre-cleaner
HYDRAULIC SYSTEM
- Boom lowering check valve
- Stick lower check valve
- Electronic main control valve
- Heavy lift mode
- Auto hydraulic oil warmup
- Auto swing parking brake
- High performance hydraulic return filter
- Two-speed travel
SAFETY AND SECURITY
- 2D E-Fence (swing)
- Caterpillar One Key security system
- Lockable external tool/storage box
- Lockable door, fuel, and hydraulic tanks
- Lockable fuel drain compartment
- Lockable disconnect switch
- Service platform with anti-skid plate
- Rear and right-hand side cameras
- Operator Protective Guards (OPG)
SERVICE AND MAINTENANCE
- Integrated vehicle health management system
- Grouped location of engine oil and fuel filters
- Scheduled Oil Sampling (S·O·S℠) ports
- Electric refueling pump with auto shutoff
UNDERCARRIAGE AND STRUCTURES
- 9.0 mt (19,842 lb) counterweight
- Full-length track guiding guards
- Travel motor guard
- Bottom guard
Optional Equipment
NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
BOOMS AND STICKS
- 22 m (72'2") UHD front
- 25 m (82'0") UHD front
- Two-piece Retrofit Variable Adjustment boom
- 7.4 m (24'3") Retrofit boom
- 3.9 m (12'10") Retrofit stick (Europe, North America only)
- 3.2 m (10'6") Retrofit stick
- 2.8 m (9'2") Retrofit stick (Europe, North America only)
- Advanced tool control, UHD
- Bucket linkage, DB family
- Bucket linkage, Dedicated, C family
CAB
- Roller rear sunscreen
CAT TECHNOLOGY
- VisionLink Productivity
- Operator Coaching (VisionLink subscription required)
- Cat Advanced Payload
ENGINE
- -32° C (-25° F) cold start capability
- Cold start block heaters
- Ether starting aid
HYDRAULIC SYSTEM
- SmartBoom™ with BLCV and Overload Warning Device for UHD front (Europe only)
- Bio hydraulic oil capability
- Combined two-way auxiliary circuits
- High and medium-pressure auxiliary circuits
- Quick coupler circuit
SAFETY AND SECURITY
- 360° visibility
SERVICE AND MAINTENANCE
- QuickEvac™ maintenance ready
UNDERCARRIAGE AND STRUCTURES
- Hydraulic Variable Gauge undercarriage
- Fixed Gauge undercarriage
- 600 mm (24 in) double grouser track shoes
- 600 mm (24 in) HD triple grouser track shoes
- 700 mm (28 in) triple grouser track shoes
- 700 mm (28") HD triple grouser track shoes
Videos
-
Cat 340 Ultra High Demolition Excavators -
Cat 340F UHD Boom Change Procedure -
Stick Steer for Cat® Excavators