308 CR VAB Mini Hydraulic Excavator

The Cat® 308 CR Variable Angle Boom (VAB) Mini Excavator delivers maximum power and performance in a mini size to help you work in a wide range of applications. The Variable Angle Boom provides the maximum in linkage flexibility in tight applications.

Features

  • ALL DAY COMFORT

    ALL DAY COMFORT

    • A sealed and pressurized cab is equipped with an improved air conditioning system, adjustable wrist rests and a suspension seat to help keep you working comfortably all day long.
  • EASY TO OPERATE

    EASY TO OPERATE

    • Controls are easy to use and the intuitive Next Generation Monitor provides customizable machine operator preferences and easy to read machine information.
  • STICK STEER TRAVEL MODE

    STICK STEER TRAVEL MODE

    • Moving around the job site is even easier with the Cat Stick Steer option. Easily switch from traditional travel controls with levers and pedals to joystick controls with a push of a button. The benefit of less effort and improved control is in your hands!
  • BIG PERFORMANCE IN A MINI DESIGN

    BIG PERFORMANCE IN A MINI DESIGN

    • Increased lifting, swinging, travel and multi-functioning performance help you get the job done more efficiently, and dig-to-blade allows for easy clean up.
  • SAFETY ON THE JOB SITE

    SAFETY ON THE JOB SITE

    • Your safety is our top priority. The Cat Mini Excavator is designed to help keep you safe on the job. A back-up camera, courtesy work lights and a fluorescent retractable seat belt are just a few of the safety features we‚Äôve built into the machine.
  • SIMPLE SERVICE FOR LESS DOWNTIME

    SIMPLE SERVICE FOR LESS DOWNTIME

    • Maintenance is quick and easy on the Cat Mini Excavator. Routine check points are easy to access at ground level with grouped service points and robust service panels.
  • LOWER OPERATING COSTS

    LOWER OPERATING COSTS

    • Equipped with features such as auto idle, auto engine shutdown, and efficient hydraulics with a variable displacement pump, the Cat Mini Excavator was designed with reducing your operating costs in mind.
  • UNMATCHED DEALER SUPPORT

    • Your Cat dealer is here to help you reach your business goals. From providing equipment solutions to operator training to service needs and beyond, your Cat dealer is ready to help.
  • SUSTAINABILITY

    SUSTAINABILITY

    • The Cat® C3.3B engine meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards.
    • Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) * or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.
    • Auto Idle helps reduce unnecessary fuel burn and greenhouse gas emissions by allowing the engine to automatically go into idle mode when the machine is not working.
    • Engine Idle Shutdown Timer reduces fuel burn, greenhouse gas emissions and unnecessary idle time by shutting down the machine after a pre-set idling period.
    • Cruise control helps you maintain a constant speed as you travel across your jobsite saving fuel and reducing greenhouse gas emissions.
    • The Cat® Seat Belt Reminder provides audible and visual warnings to remind operators to buckle up during machine operation. The easy-to-install system is compatible with all equipment brands to help ensure operator safety.
    • Extended maintenance intervals not only reduce downtime but decrease the amount of fluid and filters that are replaced over the life of the machine.
    • Remote Flash minimizes downtime and maintenance time while keeping your asset running with maximum efficiency. Alerts for machine updates are sent virtually from your Cat dealer and updates can be deployed without a dealer technician needing to be onsite.(if equipped)
    • Remote Troubleshoot decreases maintenance time and keeps your machine running with maximum efficiency by allowing your Cat dealer to virtually test the machine while working. Once a problem is identified, a technician can fix it the first time, saving time and money.(if equipped)
    • Cat Grade with advanced 2D and 3D technologies combine advanced guidance with optional automated machine control helping you reach grading targets while reducing fuel burn and greenhouse gas emissions by improving efficiency, job site productivity, and accuracy. (if equipped).

    *Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel. (for use of blends higher than 20% biodiesel, consult your Cat dealer)

Specifications

Units for specifications

Engine

Net Power 69.5 hp 51.8 kW
Displacement 203 in³ 3.33 l
Note Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, exhaust system and fan.
Bore 3.7 in 94 mm
Gross Power - SAE J1995:2014 74.3 hp 55.4 kW
Stroke 4.7 in 120 mm
Net Power - 2,200 rpm - ISO 9249:2007, 80/1269/EEC 69.5 hp 51.8 kW
Engine Model - U.S. EPA Tier 4 Final/EU Stage V Cat® C3.3B

Weights

Operating Weight 20385 lb 9245 kg
Note (1) *Minimum Weight is based on rubber tracks, no counterweight, operator, full fuel tank, blade, and no bucket.
Note (2) **Maximum Weight is based on steel tracks with rubber pads, counterweight, operator, full fuel tank, blade, and no bucket.
Maximum Operating Weight with Standard Stick** 20385 lb 9245 kg
Minimum Operating Weight with Standard Stick* 19084 lb 8655 kg

Weight Increase from Minimum Configuration

Counterweight 552 lb 250 kg
Steel Tracks with Pads 752 lb 341 kg

Travel System

Maximum Traction Force - High Speed 6250 lbf 27.8 kN
Travel Speed - Low 1.9 mile/h 3.1 km/h
Ground Pressure - Maximum Weight 5.9 psi 40.6 kPa
Travel Speed - High 3.2 mile/h 5.1 km/h
Gradeability - Maximum 30 degrees
Ground Pressure - Minimum Weight 5.5 psi 37.9 kPa
Maximum Traction Force - Low Speed 15175 lbf 67.5 kN

Service Refill Capacities

Engine Oil 3 gal (US) 11.2 l
Cooling System 2.6 gal (US) 10 l
Hydraulic System 29 gal (US) 110 l
Hydraulic Tank 14 gal (US) 53 l
Fuel Tank 39 gal (US) 147 l

Hydraulic System

Digging Force - Bucket 13946 lbf 62 kN
Operating Pressure - Equipment 4134 psi 285 bar
Pump Flow at 2,400 rpm 44 gal/min 167 l/min
Operating Pressure - Travel 4134 psi 285 bar
Digging Force - Stick - Standard 9509 lbf 42.3 kN
Type Load Sensing Hydraulics with Variable Displacement Piston Pump
Operating Pressure - Swing 3626 psi 250 bar
Note Flow and pressure are not combinable. Under load, as flow rises pressure goes down.
Maximum Auxiliary Circuit - Primary - Pressure at Pump 4134 psi 285 bar
Maximum Auxiliary Circuit - Secondary - Pressure at Pump 4134 psi 285 bar
Maximum Auxiliary Circuit - Primary - Flow at Pump 35 gal/min 131 l/min
Maximum Auxiliary Circuit - Secondary - Flow at Pump 9 gal/min 33 l/min

Swing System

Machine Swing Speed 10.6 r/min 10.6 r/min
Boom Swing - Right 50 degrees
Boom Swing - Left 60 degrees

Blade

Height 17 in 431 mm
Width - Wide 96.5 in 2450 mm
Width - Standard 90.6 in 2300 mm

Certification - Cab and Canopy

Roll Over Protective Structure (ROPS) ISO 12117-2:2008
Tip Over Protective Structure (TOPS) ISO 12117:1997
Top Guard ISO 10262:1998 (Level II)

Sound

Operator Sound Pressure (ISO 6396:2008) 72 dB(A) 72 dB(A)
Note European Union Directive "2000/14/EC"
Average Exterior Sound Pressure (ISO 6395:2008) 99 dB(A) 99 dB(A)

Air Conditioning System

Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.430 metric tonnes.

Dimensions - VAB In

Dig Depth 150.2 in 3815 mm
Tail Swing with Counterweight 62.4 in 1585 mm
Maximum Blade Height 14.6 in 370 mm
Track Belt/Shoe Width 17.7 in 450 mm
Maximum Dump Clearance 135.8 in 3450 mm
Vertical Wall 99.2 in 2520 mm
Boom in Reach 122.8 in 3120 mm
Ground Clearance 13.8 in 350 mm
Swing Bearing Height 29.8 in 756 mm
Boom Swing Right 37 in 935 mm
Overall Track Width 90.6 in 2300 mm
Overall Shipping Length 253.9 in 6450 mm
Transport Height 97.4 in 2475 mm
Cab Height 100 in 2541 mm
Overall Undercarriage Length 113.4 in 2880 mm
Maximum Reach 256.5 in 6515 mm
Tail Swing without Counterweight 57.1 in 1450 mm
Maximum Reach at Ground Level 248 in 6300 mm
Stick Length 71.7 in 1820 mm
Maximum Blade Depth 16 in 407 mm
Boom Swing Left 24 in 605 mm
Maximum Dig Height 205.5 in 5220 mm

Dimensions - VAB Out

Dig Depth 136.2 in 3460 mm
Overall Shipping Length 253.9 in 6450 mm
Stick Length 71.7 in 1820 mm
Track Belt/Shoe Width 17.7 in 450 mm
Swing Bearing Height 29.8 in 756 mm
Maximum Blade Depth 16 in 407 mm
Maximum Reach at Ground Level 303.7 in 7715 mm
Transport Height 97.4 in 2475 mm
Boom in Reach 106.7 in 2710 mm
Overall Undercarriage Length 113.4 in 2880 mm
Maximum Reach 310.4 in 7885 mm
Maximum Dump Clearance 247.4 in 6285 mm
Ground Clearance 13.8 in 350 mm
Vertical Wall 146.7 in 3725 mm
Tail Swing with Counterweight 62.4 in 1585 mm
Tail Swing without Counterweight 57.1 in 1450 mm
Boom Swing Left 24 in 605 mm
Maximum Blade Height 14.6 in 370 mm
Cab Height 100 in 2541 mm
Maximum Dig Height 322 in 8180 mm
Boom Swing Right 37 in 935 mm
Overall Track Width 90.6 in 2300 mm

Sustainability

Recyclability 96%

Standard Equipment

ENGINE

  • Cat C3.3 Diesel Engine (U.S. EPA Tier 4 Final/EU Stage V) – Electronic Engine, Turbo, Diesel Particulate Filter (DPF)
  • Automatic Engine Idle
  • Automatic Engine Shutdown
  • Automatic Swing Brake
  • Automatic Two Speed Travel
  • Fuel Water Separator with Indicator
  • Radial Seal – Double Element Air Filter
  • Extended Life Coolant, –37° C ( –35° F)
  • Ecology Drain

HYDRAULICS

  • Smart Tech Electronic Pump
  • Electronic Variable Displacement Piston Pump
  • Load Sensing/Flow Sharing Hydraulics
  • Power On Demand
  • Hydraulic Temperature Monitoring
  • Certified Accumulator
  • HYDO Advanced Hydraulic Oil

OPERATOR ENVIRONMENT

  • Top Guard ISO 10262 1998 Level I
  • ROPS ISO 12117-2:2008
  • Sealed and Pressurized Cab
  • Stick Steer Mode
  • Travel Cruise Control
  • Control Pattern Changer
  • Adjustable Wrist Rests
  • Molded Footrests
  • Removable, Washable Floor Mat
  • Travel Pedals and Hand Levers
  • Cat Key with Passcode Option
  • HVAC with Automatic Temperature Control
  • Hydraulic Lockout Controls
  • Integrated Lower Front Window
  • Assisted Front Window Overhead Storage
  • Rear Window Emergency Exit
  • Fabric, High Back, Suspension Seat
  • Retractable Seat Belt (75 mm/3 in)
  • Coat Hook
  • Cup Holder
  • LED Interior Light
  • Literature Holder
  • Mounting Bosses for Top and Front Guards
  • 12V Power Socket
  • Radio – Bluetooth, Auxiliary, Microphone, USB (charging only)
  • Skylight
  • Signaling/Warning Horn
  • Cab and (left side) Boom Work Lights
  • Utility Space for Mobile Phone
  • Next Generation Color LCD Monitor (IP66)
    – Jog Dial Interface
    – Fuel Level and Coolant Temperature Gauges
    – Maintenance and Machine Monitoring
    – Performance and Machine Adjustments
    – Numeric Security Code
    – Multiple Languages
    – Camera Ready (IP68 & IP69K)
    – Hour Meter with Wake Up Switch

UNDERCARRIAGE

  • Greased and Lubricated Track
  • Hydraulic Track Adjusters
  • Tie Down Eyes on Track Frame
  • Dozer Blade
  • Dozer Float
  • Bolt-on, Reversible Wear Edge

BOOM, STICK AND LINKAGES

  • Variable Angle Boom
  • Standard Stick (1820 mm/71.7 in)
  • Front Shovel Capable – Pin-on/Manual Coupler/Hydraulic Coupler (not available in all regions)
  • Thumb Ready (not available in all regions)

ELECTRICAL

  • 12 Volt Electrical System
  • 60 Ampere Alternator
  • Circuit Breaker
  • 900 CCA Maintenance Free Battery
  • Battery Disconnect
  • Ignition Key Stop Switch

OTHER

  • Locks on External Enclosure Doors
  • Lockable Fuel Cap
  • Beacon Socket
  • Rear Reflectors

Optional Equipment

OPERATOR ENVIRONMENT

  • Push to Start with Bluetooth® Key
  • Air Suspension Heated Seat
  • Rain Visor
  • Next Generation Advanced Monitor (below are all included with Next Generation Advanced Monitor option)
    – Touch Screen
    – Site Reference System
    – High Definition Camera Capable (IP68 & IP69K)
    – Numeric Security Code

UNDERCARRIAGE

  • Wide Dozer Blade
  • Steel Tracks (450 mm/17.7 in wide)
  • Wide Steel Tracks (600 mm/23.6 in)
  • Steel Track with Rubber Pads
  • Track Guides

BOOM, STICK AND LINKAGES

  • Attachments including Buckets, Augers and Hammers
  • 2nd Auxiliary Hydraulic Lines
  • Boom Lowering Check Valve
  • Stick Lowering Check Valve
  • Certified Lifting Eye

ELECTRICAL

  • Product Link Elite (regulations apply)
  • Travel Alarm
  • Rearview Camera
  • Rotating Beacon

GUARDING

  • Mesh Front Guard ISO 10262 1998 Level I
  • Heavy Duty Front Guard ISO 10262 1998 Level II
  • Overhead Cab Guard ISO 10262 1998 Level II
  • Polycarbonate Front Window EN356 P5A
  • Track Guards

OTHER

  • Additional Counterweight
  • Water Jacket Heater
  • Refueling Pump

Videos

  • Introducing the Next Generation Cat 7-10 Ton Mini Excavators
  • Overview of the Next Generation Cat 7-10 Ton Mini Excavators
  • Standard Monitor on the Next Generation Cat Mini Excavators
  • Stick Steer on the Cat Next Generation Mini Excavators
  • Daily Maintenance and Inspection on the Cat 7-10 Ton Mini Excavators
  • Safety Features on the Cat 7-10 Ton Mini Excavators
308 CR VAB Mini Hydraulic Excavator

Documents

Related Attachments