Skip to main content Skip to navigation
Ag Agriculture Blog IconBehind the Scenes Blog IconConstruction Blog IconEquipment Maintenance Blog Icon Power Systems Blog Icon Thumbs Down Thumbs Up! Small Business Blog IconTachnology Blog Icon Constructioncontrol-smallcost-smallefficiency-smallflexibility-smallHoursHours Location HoursMapMapMenu AgMenu AttachmentsMenu BlogMenu CareersMenu ChecklistMenu ConstructionMenu MaintenanceMenu NewMenu PowerMenu RebuildsMenu RentMenu ServiceMenu TechnologyMenu TestimonialsMenu Training Menu Truck Menu UsedNewArtboard 1Parts Phone Phone PhonePower Systemsproductivity-smallRentalRepSafetyServiceSpecialsTechtestimonial-iconToolsTrainingTruckUsed
View Quote List

New Equipment

Caterpillar

930M Waste Handler Small Wheel Loader

Maximum Gross Power

168 HP

Operating Weight

37713 lb

Bucket Capacities

3.0-5.0 m3 (3.9-6.5 yd3)

Overview

The Cat® 930M Waste Handler sets a new standard for productivity, fuel efficiency and comfort. A high torque, low speed C7.1 engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. A complete range of guarding and debris management solutions are available to meet the needs of the most demanding environments. Extremely low sound levels, large spacious cab and intuitive controls keep you working comfortably all day and even all night! Experience this industry benchmark.

Photos

  • Studio Shot
    Studio Shot
  • 930M Waste Handler
    930M Waste Handler
  • 930M Waste Handler
    930M Waste Handler
  • 930M Waste Handler
    930M Waste Handler
  • 930M Waste Handler
    930M Waste Handler
  • Front View
    Front View
  • Top View
    Top View
  • Left View
    Left View
  • Rear View
    Rear View
  • Bottom View
    Bottom View
  • Right View
    Right View

Videos

  • Waste Handler Overview | Cat® 926M, 930M, 938M Small Wheel Loader
  • M Series Small Wheel Loaders | At Work
  • M Series Small Wheel Loaders | Overview
  • Built in Quality: Cat® Small Wheel Loaders Manufactured in Clayton, NC
  • Safety and Service Overview | Cat® 926M, 930M, 938M Small Wheel Loader
  • Kick-Outs, Snubbing, Wrap-Out and Soft Detents | M Series Small Wheel Loader Operator Tips
  • Secondary Display Navigation | M Series Small Wheel Loader Operator Tips
  • Preventative Maintenance | M Series Small Wheel Loader Operator Tips
  • Coded Start Feature/Individual Operator Profiles | M Series Small Wheel Loader Operator Tips
  • Rim Pull | M Series Small Wheel Loader Operator Tips
  • Creeper Control | M Series Small Wheel Loader Operator Tips
  • Efficient Hystat Operation | M Series Small Wheel Loader Operator Tips
  • Throttle Lock | M Series Small Wheel Loader Operator Tips
  • Fine Mode Control and Perfect Parallelism | M Series Small Wheel Loader Operator Tips
  • Quick Steer | M Series Small Wheel Loader Operator Tips
  • Power Train Modes | M Series Small Wheel Loader Operator Tips
  • Cab Controls and Features | M Series Small Wheel Loader Operator Tips
  • Hydro-mechanical Applications | M Series Small Wheel Loader Operator Tips
  • Third and Fourth Auxiliary Flow | M Series Small Wheel Loader Operator Tips
  • Reversing Fan | M Series Small Wheel Loader Operator Tips
  • Customize Your Experience | M Series Small Wheel Loader Operator Tips
  • Diesel Exhaust Fluid (DEF) Fill Alarm | M Series Small Wheel Loader Operator Tips
  • Cat® Production Measurement (CPM) | M and K Series Small Wheel Loader Operator Tips
  • Cat® Production Measurement (CPM) Updates | M and K Series Small Wheel Loader Operator Tips
  • Differential Lock | M Series Small Wheel Loader Operator Tips
  • Tire Pressure Monitoring System | M Series Small Wheel Loader Operator Tips
  • Tire Pressure Monitoring System Updates | M Series Small Wheel Loader Operator Tips
  • Engine Idle Shutdown | M and K Series Small Wheel Loader Operator Tips
  • Continuously Adjustable Creep Mode | M and K Series Small Wheel Loader Operator Tips
  • Operator ID and Machine Security | M and K Series Small Wheel Loader Operator Tips

360° View

Exterior

360° Exterior view. Double click on the image to zoom in on any area of the product.

Interior

360° Interior view. Double click on the image to zoom in on any area of the product.

Documents

Features

Application Specific Configuration

Application Specific Configuration

GUARD YOUR INVESTMENT
Choose from a complete range of optional guarding to protect your machine from the harsh environment of a waste handling application. The machine guarding is purpose built to protect the machine's major components and systems to keep you on the job and maximize production rates.

BREATHE CLEAN
Maximize your engine life and extend filter cleaning intervals with a turbine pre-cleaner. Keep cool with a reversing fan to purge the single plane, widely spaced core cooling package and brush-less sealed alternator. Breath clean with a powered RESPA system for the operator environment designed to eliminate 90% of the particulate in the air and filter the remaining 10%.

MAXIMIZE TIRE LIFE
Fine tune your wheel torque to match the underfoot conditions and maximize performance while extending tire life. Cat Waste Handlers feature wheel torque adjustments through an exclusive Rimpull Control feature designed to keep your operating costs low.

Application Specific Configuration

GUARD YOUR INVESTMENT
Choose from a complete range of optional guarding to protect your machine from the harsh environment of a waste handling application. The machine guarding is purpose built to protect the machine's major components and systems to keep you on the job and maximize production rates.

BREATHE CLEAN
Maximize your engine life and extend filter cleaning intervals with a turbine pre-cleaner. Keep cool with a reversing fan to purge the single plane, widely spaced core cooling package and brush-less sealed alternator. Breath clean with a powered RESPA system for the operator environment designed to eliminate 90% of the particulate in the air and filter the remaining 10%.

MAXIMIZE TIRE LIFE
Fine tune your wheel torque to match the underfoot conditions and maximize performance while extending tire life. Cat Waste Handlers feature wheel torque adjustments through an exclusive Rimpull Control feature designed to keep your operating costs low.
Efficiently Powerful

Efficiently Powerful

The Cat® C7.1 engine provides cleaner, quieter operation while delivering superior performance and durability through a high torque, low speed design. Caterpillar's exclusive Intelligent Power Management system monitors operator input and power availability to keep the machine working at peak efficiency and provide the operator with greater customization to suit their application.

A choice of Power Modes allows you to choose between maximum fuel efficiency or boosted power along with hydraulic speed.

STANDARD POWER MODE
  • Saves fuel and reduces cab sound levels
  • Biggest gains are seen during load and carry, snow removal and roading applications

PERFORMANCE POWER MODE
  • Enabled at the push of a button (HP+), boosts engine power by up to 10% and engine speed by over 12%
  • Increases hydraulic cycle times and productivity

Lock up and go with fully locking front differential axle that can be engaged on the move at full torque. Maximize your traction with optional Limited Slip Differential on the rear axle to keep you climbing.

Efficiently Powerful

The Cat® C7.1 engine provides cleaner, quieter operation while delivering superior performance and durability through a high torque, low speed design. Caterpillar's exclusive Intelligent Power Management system monitors operator input and power availability to keep the machine working at peak efficiency and provide the operator with greater customization to suit their application.

A choice of Power Modes allows you to choose between maximum fuel efficiency or boosted power along with hydraulic speed.

STANDARD POWER MODE
  • Saves fuel and reduces cab sound levels
  • Biggest gains are seen during load and carry, snow removal and roading applications

PERFORMANCE POWER MODE
  • Enabled at the push of a button (HP+), boosts engine power by up to 10% and engine speed by over 12%
  • Increases hydraulic cycle times and productivity

Lock up and go with fully locking front differential axle that can be engaged on the move at full torque. Maximize your traction with optional Limited Slip Differential on the rear axle to keep you climbing.
Enjoy All Day Comfort

Enjoy All Day Comfort

A spacious, quiet and comfortable operator environment helps keep you relaxed and productive throughout the day. Experience superior all around visibility with single piece front windshield, redesigned linkage and clean hydraulic lines routing. Seat-mounted controls featuring low effort joystick for lift and tilt functions along with integrated Forward/Neutral/Reverse switch, differential lock trigger and optional third and fourth auxiliary functions.

  • Automatic climate control with heated rear glass and external mirrors
  • Information at a glance with large primary LCD display
  • Heated and cooled seat option
  • Optional Ride Control
  • Exclusive electro-hydraulic cylinder snubbing
  • An extra eye on the job site with optional integrated rear object detection and optional* rearview camera

*Standard in Europe.

Enjoy All Day Comfort

A spacious, quiet and comfortable operator environment helps keep you relaxed and productive throughout the day. Experience superior all around visibility with single piece front windshield, redesigned linkage and clean hydraulic lines routing. Seat-mounted controls featuring low effort joystick for lift and tilt functions along with integrated Forward/Neutral/Reverse switch, differential lock trigger and optional third and fourth auxiliary functions.

  • Automatic climate control with heated rear glass and external mirrors
  • Information at a glance with large primary LCD display
  • Heated and cooled seat option
  • Optional Ride Control
  • Exclusive electro-hydraulic cylinder snubbing
  • An extra eye on the job site with optional integrated rear object detection and optional* rearview camera

*Standard in Europe.
Customize Your Experience

Customize Your Experience

The M Series Waste Handler will remember you and your personal settings with unique operator codes to make this machine truly yours and keep it secure.

Work as one with your machine by customizing your controls.
  • Select your Power Train Mode
  • Reduce tire wear using Rimpull
  • Fine tune ground speed with Creeper Control
  • Adjustable Electo-Hydraulic Controls
  • Set Directional Shift Response based on job application

Customize Your Experience

The M Series Waste Handler will remember you and your personal settings with unique operator codes to make this machine truly yours and keep it secure.

Work as one with your machine by customizing your controls.
  • Select your Power Train Mode
  • Reduce tire wear using Rimpull
  • Fine tune ground speed with Creeper Control
  • Adjustable Electo-Hydraulic Controls
  • Set Directional Shift Response based on job application
Service

Service

Get up and running quickly with ground level, daily service access and optional engine compartment lighting. Three large service doors can be opened and closed in any order to give full access to filters and service points. Extended service intervals on hydraulic and power train filters reduce service time and maximize uptime. Additional service features include:

  • Product Link™ PRO standard with optional subscription to VisionLink®.
  • Maintenance reminders through secondary display at scheduled intervals.
  • Fit for Life Diesel Particulate Filter that is designed to exceed the engine overhaul life.
  • Quick fuel filter service with Caterpillar's exclusive electric fuel priming pump.
  • Jump start studs as standard equipment.
  • Extended cleanouts with single plane cooling system and wide spaced 6 fans per inch coolers as standard.
  • Integrated Autolube (optional) with adjustable greasing frequency.

Service

Get up and running quickly with ground level, daily service access and optional engine compartment lighting. Three large service doors can be opened and closed in any order to give full access to filters and service points. Extended service intervals on hydraulic and power train filters reduce service time and maximize uptime. Additional service features include:

  • Product Link™ PRO standard with optional subscription to VisionLink®.
  • Maintenance reminders through secondary display at scheduled intervals.
  • Fit for Life Diesel Particulate Filter that is designed to exceed the engine overhaul life.
  • Quick fuel filter service with Caterpillar's exclusive electric fuel priming pump.
  • Jump start studs as standard equipment.
  • Extended cleanouts with single plane cooling system and wide spaced 6 fans per inch coolers as standard.
  • Integrated Autolube (optional) with adjustable greasing frequency.
Customer Support

Customer Support

With renowned Cat dealer support, rely on your Cat dealer to help you every step of the way with new or used machine sales, rental or rebuild options to meet your business needs.

Maximize your machine uptime with unsurpassed worldwide parts availability, trained technicians and customer support agreements.

Let us earn your business. Experience an M Series Small Wheel Loader and join the Caterpillar family.

Customer Support

With renowned Cat dealer support, rely on your Cat dealer to help you every step of the way with new or used machine sales, rental or rebuild options to meet your business needs.

Maximize your machine uptime with unsurpassed worldwide parts availability, trained technicians and customer support agreements.

Let us earn your business. Experience an M Series Small Wheel Loader and join the Caterpillar family.

Sustainability

Sustainability

  • The Cat® C7.1 engine meets U.S. EPA Tier 4 Final, EU Stage V and Korea Tier 5 emission standards.
  • Engine Idle Management System (EIMS) helps maximize fuel efficiency and reduce greenhouse gas emissions while maintaining machine performance.
  • Engine Idle Shutdown Timer reduces fuel burn, greenhouse gas emissions and unnecessary idle time by shutting down the machine after a pre-set idling period.
  • Performance Series Buckets have rounded side boards, a longer floor and open angle to carry more and load quicker so each pass is the most efficient.
  • Rimpull Control is a quick way to adjust the torque to the tires for less slipping and tire wear.
  • Cat® Production Measurement provides real-time payload weighing which help you maximize productivity, reduce fuel burn and greenhouse gas emissions, all while improving job site efficiency and lowering costs.
  • Extended maintenance intervals not only reduce downtime but decrease the amount of fluid and filters that are replaced over the life of the machine.
  • Power on Demand, transparent to the operator, provides full-time efficiency and power when you need it.
  • Tire Pressure Monitoring provides real-time tire pressure information to the operator to help increase tire wear and achieve better fuel efficiency and reduced greenhouse gas emissions.
  • Intelligent Hystat Transmission helps improves control and reduces fuel consumption and greenhouse gas emissions in load and carry applications.
  • Variable Displacement Pumps match power to load as application requirements change.

Sustainability

  • The Cat® C7.1 engine meets U.S. EPA Tier 4 Final, EU Stage V and Korea Tier 5 emission standards.
  • Engine Idle Management System (EIMS) helps maximize fuel efficiency and reduce greenhouse gas emissions while maintaining machine performance.
  • Engine Idle Shutdown Timer reduces fuel burn, greenhouse gas emissions and unnecessary idle time by shutting down the machine after a pre-set idling period.
  • Performance Series Buckets have rounded side boards, a longer floor and open angle to carry more and load quicker so each pass is the most efficient.
  • Rimpull Control is a quick way to adjust the torque to the tires for less slipping and tire wear.
  • Cat® Production Measurement provides real-time payload weighing which help you maximize productivity, reduce fuel burn and greenhouse gas emissions, all while improving job site efficiency and lowering costs.
  • Extended maintenance intervals not only reduce downtime but decrease the amount of fluid and filters that are replaced over the life of the machine.
  • Power on Demand, transparent to the operator, provides full-time efficiency and power when you need it.
  • Tire Pressure Monitoring provides real-time tire pressure information to the operator to help increase tire wear and achieve better fuel efficiency and reduced greenhouse gas emissions.
  • Intelligent Hystat Transmission helps improves control and reduces fuel consumption and greenhouse gas emissions in load and carry applications.
  • Variable Displacement Pumps match power to load as application requirements change.

Specifications

  • Engine
    Spec Value
    Maximum Gross Power 168 HP
    Bore 4 in
    Stroke 5 in
    Displacement 427 in³
    Note (3) No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
    Maximum Gross Power - ISO 14396 (Performance Power Mode: Range 1-4) 168 HP
    Maximum Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4) 1800 r/min
    Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4) 601 ft·lbf
    Maximum Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*) 1600 r/min
    Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*) 586 ft·lbf
    Maximum Gross Power - ISO 14396 (Standard Power Mode: Range 1-3*) 160 HP
    Maximum Net Torque - SAE J1349 (Performance [HP+] Power Mode: Range 1-4) 588 ft·lbf
    Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*) 573 ft·lbf
    Emissions The Cat C7.1 engine meets U.S. EPA Tier 4 Final/EU Stage V and Korea Tier 4 Final emission standards.
    Engine Model Cat® C7.1
    Note (1) *Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
    Note (2) Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
    Maximum Net Torque - ISO 9249:2007 (Standard Power Mode: Range 1-3*) 572 ft·lbf
    Maximum Net Torque - ISO 9249:2007 (Performance Power Mode: Range 1-4) 587 ft·lbf
    Net Power - ISO 9249 (metric) at Minimum Fan Speed (Performance Power Mode: Range 1-4) 166 HP
    Maximum Gross Power - ISO 14396 (metric) (Performance Power Mode: Range 1-4) 170 HP
    Net Power - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4) 163 HP
    Net Power - ISO 9249 at Minimum Fan Speed (Performance Power Mode: Range 1-4) 164 HP
    Engine Power - ISO 14396 - Metric 170 HP
    Engine Power - ISO 14396 168 HP
    Maximum Gross Power - ISO 14396 (metric) (Standard Power Mode: Range 1-3*) 162 HP
    Net Power - ISO 9249 (metric) at Minimum Fan Speed (Standard Power Mode: Range 1-3*) 158 HP
    Net Power - ISO 9249 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) 156 HP
    Net Power (Standard Power Mode: Range 1-3*) 1600 r/min
    Net Power - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) 156 HP
    Net Power (Performance Power Mode: Range 1-4) 1800 r/min
  • Buckets
    Spec Value
    Bucket Capacities 3.0-5.0 m3 (3.9-6.5 yd3)
  • Operating Specifications
    Spec Value
    Note (2) ^Dimensions listed are for a machine configured with standard counterweights, waste guarding, rear waste gate, 80 kg (176 lb) operator, and new solid tires.
    Note (1) **Dimensions listed are for a machine configured with optional counterweights, waste guarding, 80 kg (176 lb) operator, and Michelin 20.5 R25 XMINE D2 tires.
    Full Turn Tip Load (2) 9525 kg (20,998 lb)^
    Full Turn Tip Load (1) 8573 kg (18,900 lb)**
  • Weights
    Spec Value
    Operating Weight 37713 lb
    Note (2) ^Dimensions listed are for a machine configured with standard counterweights, waste guarding, rear waste gate, 80 kg (176 lb) operator, and new solid tires.
    Note (1) **Dimensions listed are for a machine configured with optional counterweights, waste guarding, 80 kg (176 lb) operator, and Michelin 20.5 R25 XMINE D2 tires.
    Operating Weight (1) 15 381 kg (33,908 lb)**
    Operating Weight (2) 17 107 kg (37,713 lb)^
  • Cab
    Spec Value
    ROPS ISO 3471:2008
    FOPS ISO 3449:2005 LEVEL II
    Note (1) * Measurements were conducted at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurements were conducted with the cab doors and the cab windows closed.
    – The Blue Angel environmental label is an optional attachment for Europe only.
    Declared Sound Levels - Operator Sound Pressure Level (ISO 6396:2008)* 68 dB(A)
    Declared Sound Levels - Exterior Sound Power Level (ISO 6395:2008)* 101 dB(A)
  • Air Conditioning System
    Spec Value
    Air Conditioning The air conditioning system on this machine contains the flourinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes.
  • Loader Hydraulic System
    Spec Value
    Maximum Flow - Implement Pump 50 gal/min
    Maximum Working Pressure - Implement Pump 3771 psi
    Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Raise (Ground Level to Maximum Lift) 5.1/5.7 seconds
    Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure 4061 psi
    Relief Pressure - Tilt Cylinder 4061 psi
    Note (1) Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.
    Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Dump (at Maximum Lift Height) 1.5/1.7 seconds
    Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Float Down (Maximum Lift to Ground Level) 2.7/2.7 seconds
    Note (2) Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
    Maximum Flow - Implement Pump - 4th Function Maximum Flow* 42 gal/min
    Note (3) * 3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the touch screen display when equipped.
    Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure 4061 psi
    Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Total Cycle Time 9.3/10.1 seconds
    Maximum Flow - Implement Pump - 3rd Function Maximum Flow* 50 gal/min
    Lift Cylinder: Standard Lift Linkage - Stroke 28.7 in
    Tilt Cylinder: Standard Lift Linkage - Bore Diameter 5.9 in
    Lift Cylinder: Standard Lift Linkage - Bore Diameter 4.7 in
    Lift Cylinder: Standard Lift Linkage - Rod Diameter 2.6 in
    Tilt Cylinder: Standard Lift Linkage - Rod Diameter 3.5 in
    Tilt Cylinder: Standard Lift Linkage - Stroke 21.9 in
  • Steering
    Spec Value
    Steering Cylinder, Double Acting - Bore Diameter 2.8 in
    Steering Cylinder, Double Acting - Rod Diameter 1.6 in
    Maximum Steering Torque - 0° (Straight Machine) 37155 ft·lbf
    Steering Cylinder, Double Acting - Stroke 17.2 in
    Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed 2.4 s
    Maximum Working Pressure - Steering Pump 3500 psi
    Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited 2.8 s
    Maximum Steering Torque - 40° (Full Turn) 27747 ft·lbf
    Note (1) Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.
    Note (2) Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
    Maximum Flow - Steering Pump 34 gal/min
  • Transmission
    Spec Value
    Forward and Reverse - Range 4 25 mile/h
    Forward and Reverse - Range 3 17 mile/h
    Forward and Reverse - Range 2 8 mile/h
    Note *Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the touch screen display when equipped. Factory default is 7 km/h (4.4 mph).
    Forward and Reverse - Range 1* 1-13 km/h (0.6-8 mph)
  • Power Train
    Spec Value
    Rear Axle - Oscillation Angle by Tire Size - 20.5 R25, 550/65, 600/65, 650/65 ± 10.5 degrees
    Note (3) Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 930M.
    Note (2) Offset rims available to meet European roading requirements.
    Rear Axle Oscillating
    Front Axle Fixed
    Brakes - Parking Spring applied hydraulically released
    Note (1) Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.
    Front Axle - Traction Aid Locking differential
    Rear Axle - Traction Aid - Optional Limited slip differential
    Brakes - Service Inboard wet disc
    Rear Axle - Oscillation Angle by Tire Size - Solid Tires, 750/65, 620/65, Skidder ± 7 degrees
  • Service Refill Capacities
    Spec Value
    Cooling System 7.9 gal (US)
    Engine Crankcase 5.3 gal (US)
    Axles - Rear 6.6 gal (US)
    Hydraulic Tank 23.8 gal (US)
    Transmission - Gear Box 2.2 gal (US)
    Fuel Tank 51.5 gal (US)
    Axles - Front 6.9 gal (US)
    Diesel Exhaust Fluid (DEF) Tank 5 gal (US)
    Hydraulic System - Including Tank 43.6 gal (US)
  • Sustainability
    Spec Value
    Recyclability 94%

Standard Equipment

POWER TRAIN

  • Axle Duo-Cone™ seal guards
  • Auto idle shut down feature
  • Cat C7.1 engine
    – Power modes (Standard and Performance)
    – Power by range (High Power in Range 4)
    – Turbocharged and aftercooled
    – Diesel particulate filter (Fit for Life)
  • Coded start (requires secondary display)
  • Differential lock in front axle
  • Enclosed wet disc full hydraulic brakes
  • Hydraulically driven demand cooling fan
  • Hydrostatic transmission with electronic control
    – Operator modes (Default, TC, Hystat, and Ice)
    – Directional Shift Aggressiveness (fast, medium, slow)
    – Rimpull control, adjust wheel torque
    – Creeper control, adjust ground speed
  • Parking brake, electric
  • Single plane cooling package wide six fins per inch density
  • Oil sampling ports
  • Throttle lock and max speed limiter

HYDRAULICS

  • Automatic lift lower and tilt kickouts, adjustable in-cab
  • Bucket and fork modes, adjustable in-cab
  • Cylinder damping at kickout and mechanical end stops
  • Fine mode control (fast, medium, slow)
  • Hydraulic response setting (fast, medium, slow)
  • Load sensing hydraulics and steering
  • Seat-mounted hydraulic joystick controls

ELECTRICAL

  • Alternator, 115 amp, heavy duty
  • Batteries, 1,000 CCA (2) 24V system, disconnect switch
  • Back-up alarm
  • Emergency shutdown switch
  • Halogen work and roading lights, LED rear tail lights
  • Product Link PRO with three year subscription
  • Remote jump start post
  • Resettable main and critical function breakers

OPERATOR ENVIRONMENT

  • 75 mm (3 in) High-Vis retractable seat belt, with audible alarm and indicator
  • Automatic temperature control
  • Cab, pressurized
  • Camera, rearview
  • External heated mirrors with lower parabolic
  • Ground level cab door release
  • Hydraulic control lockout
  • Mirror, single
  • Lunch box storage
  • Radio ready speakers
  • Rear window defrost, electric
  • Column mounted multi function control – lights, wipers, turn signal
  • Tilt and telescopic steering wheel
  • Tinted front glass
  • Wet arm wiper/washer, 2-speed and intermittent, front, lights, wipers, turn signal
  • Suspension seat, fabric

OTHER STANDARD EQUIPMENT

  • Large-access enclosure doors with adjustable close/open force
  • Cat optimized Z-bar linkage with parallel lift
  • Recovery hitch, with pin
  • Remote mounted lubrication points
  • Lockable compartments and enclosures

Optional Equipment

OPTIONAL EQUIPMENT

  • Autolube, integrated in secondary display
  • Auxiliary flow, third and fourth function
  • Differential, limited slip, rear
  • Beacon light, strobe
  • Cab, deluxe (standard in Europe)
    – Camera, rearview integrated into advanced display
    – Electrically adjustable external heated mirrors (2)
    – Secondary display to enable features and adjust parameters
    – LED interior lighting
    – Sunscreen, front and rear
    – Touchscreen secondary display
    – Ride control adjustable speed activation
    – Preventative maintenance reminders
    – Integrated help function (26 languages)
  • Camera, roof mounted, front view with separate display
  • Cold start package
    – Ether starting aid, block heater and additional batteries, 1,000 CCA (4 total)
  • Counterweight, additional options
  • Coupler, (Fusion and ISO 23727)
  • Debris packages (low, medium, high)
  • Fenders (extended cover and full coverage)
  • Guarding packages
  • Linkage, high lift
  • Lights, auxiliary, halogen or LED with engine and DEF compartment lights
  • Payload Technology
    – Cat Production Measurement (CPM)
    – CPM Printer
  • Product Link ELITE with capabilities for software push, data logging, histogram and trend mapping
  • Radio packages
  • Rear Object Detection
  • Ride Control System, adjustable through secondary display
  • Seats
    – Deluxe seat – fully adjustable fabric air suspension seat with mid seat backrest
    – Premium seat – fully adjustable leather and fabric air suspension with high backrest and air lumbar support. Seat is heated and ventilated on bottom cushion and backrest.
  • Steering
    – Dual mode and secondary
  • Tire Pressure Monitoring (TPM)

Related Products

General Purpose Buckets - Performance Series

Studio Shot 2.9 m3 (3.8 yd3), Fusion™ Coupler
Studio Shot 2.5 m3 (3.3 yd3), Fusion™ Coupler, BOCE
Studio Shot 2.7 m3 (3.5 yd3), Fusion™ Coupler
Studio Shot 2.5 m3 (3.3 yd3), Fusion™ Coupler, BOCE
Studio Shot 2.9 m3 (3.8 yd3), Fusion™ Coupler, BOCE
Studio Shot 2.5 m3 (3.3 yd3), Fusion™ Coupler
Studio Shot 2.7 m3 (3.5 yd3), Fusion™ Coupler, BOCE
Studio Shot 2.5 m3 (3.3 yd3), Fusion™ Coupler
Studio Shot 2.7 m3 (3.5 yd3), Fusion™ Coupler

Light Material Buckets

Studio Shot 4.2 m3 (5.5 yd3), Fusion™ Coupler, BOCE
Studio Shot 3.5 m3 (4.6 yd3), Fusion™ Coupler, BOCE
Studio Shot 5.0 m3 (6.5 yd3), Fusion™ Coupler, BOCE
Studio Shot 3.0 m3 (3.9 yd3), Fusion™ Coupler, BOCE
Studio Shot 3.8 m3 (5.0 yd3), Fusion™ Coupler, BOCE
Studio Shot 3.8 m3 (5.0 yd3), Pin On, Bolt-On Cutting Edge