Skip to main content Skip to navigation
Ag Agriculture Blog IconBehind the Scenes Blog IconConstruction Blog IconEquipment Maintenance Blog Icon Power Systems Blog Icon Thumbs Down Thumbs Up! Small Business Blog IconTachnology Blog Icon Constructioncontrol-smallcost-smallefficiency-smallflexibility-smallHoursHours Location HoursMapMapMenu AgMenu AttachmentsMenu BlogMenu CareersMenu ChecklistMenu ConstructionMenu MaintenanceMenu NewMenu PowerMenu RebuildsMenu RentMenu ServiceMenu TechnologyMenu TestimonialsMenu Training Menu Truck Menu UsedNewArtboard 1Parts Phone Phone PhonePower Systemsproductivity-smallRentalRepSafetyServiceSpecialsTechtestimonial-iconToolsTrainingTruckUsed
View Quote List

New Equipment

Caterpillar

Power Grid Stabilization (PGS) module

Application

Transient Assist

Module Type

Grid stabilization

Nameplate Power

767 kW | 1000 kW

Overview

The Cat® PGS module is a scalable, rapidly deployable energy storage system using Lithium Ion batteries and the Cat® BDP1000 inverter. The PGS integrates with solar or other renewable sources to provide short duration power when the renewable source is not available. The PGS also provides reserve power to optimize generator set operation. The system may provide temporary backup power to facilities in the event of a power outage.

Photos

  • Power Grid Stabilization
    Power Grid Stabilization

360° View

Exterior

360 Exterior view. Double click on the image to zoom in on any area of the product.

Interior

360 Interior view. Double click on the image to zoom in on any area of the product.

Showroom

Virtual Product Tour. Double click on the hotspots to see in on any area of the product.

Documents

Features

Reliable and Scalable

Reliable and Scalable

Factory prepackaged and tested
  • Pre-engineered containershipped as a single unit with batteries, inverter, isolation transformer and other equipment installed.
  • Parallel ready - multiple modules may be used in parallel to increase total output up to 100+MW.

Reliable and Scalable

Factory prepackaged and tested
  • Pre-engineered containershipped as a single unit with batteries, inverter, isolation transformer and other equipment installed.
  • Parallel ready - multiple modules may be used in parallel to increase total output up to 100+MW.

Renewable Integration

Renewable Integration

  • Designed to work with an array of renewable systems, including solar and wind
  • Seamless integration with Cat Microgrid Master Controller (MMC) allows for maximum renewable penetration and full asset control

Renewable Integration

  • Designed to work with an array of renewable systems, including solar and wind
  • Seamless integration with Cat Microgrid Master Controller (MMC) allows for maximum renewable penetration and full asset control

Transient Assist

Transient Assist

When used with a generator set, the Cat PGS module will provide reserve power capacity to:
  • Decrease the transient voltage and frequency dips resulting from the application of large loads.
  • Enables highly-efficient lean-burn gas gensets to operate in island mode.

Transient Assist

When used with a generator set, the Cat PGS module will provide reserve power capacity to:
  • Decrease the transient voltage and frequency dips resulting from the application of large loads.
  • Enables highly-efficient lean-burn gas gensets to operate in island mode.

Grid Stabilization

Grid Stabilization

  • Protects against many typical power problems, including power failure, voltage sags/surges, and under/over frequency conditions.

Grid Stabilization

  • Protects against many typical power problems, including power failure, voltage sags/surges, and under/over frequency conditions.

High Performance Inverter

High Performance Inverter

  • Built-in controls for the charging and discharging of the energy storage equipment.
  • Static VAR compensator.
  • Four-quadrant output power factor control.
  • Automatic anti-islanding to meet UL 1741 and synchronization back to grid.

High Performance Inverter

  • Built-in controls for the charging and discharging of the energy storage equipment.
  • Static VAR compensator.
  • Four-quadrant output power factor control.
  • Automatic anti-islanding to meet UL 1741 and synchronization back to grid.

Applicable Standards and Certifications

Applicable Standards and Certifications

UL Listed to the following standards (certification and mark pending):
  • UL 9540
  • UL 1741 SB
  • CSA C22.2 No. 107.1/16
  • cULus mark
Declarations (pending):
  • CE Declaration of conformity
  • IEC60204-1

Applicable Standards and Certifications

UL Listed to the following standards (certification and mark pending):
  • UL 9540
  • UL 1741 SB
  • CSA C22.2 No. 107.1/16
  • cULus mark
Declarations (pending):
  • CE Declaration of conformity
  • IEC60204-1

Specifications

  • Technical Summary
    Spec Value
    Application Transient Assist
    Module Type Grid stabilization
    Nameplate Power 767 kW | 1000 kW
    Nameplate Energy Capacity 448 kWh | 672 kWh

Standard Equipment

Power Grid Stabilization

  • Cat BDP bi-directional power inverter
  • Energy storage batteries
  • Color HMI touchscreen
  • Remote communications via Modbus TCP
  • HVAC system to maintain interior temperature
  • Liquid / Air cooling
  • Isolation Transformer
  • Convenience receptacles
  • Fire suppression system