Producing reliable power from 1650 to 2000 ekW at 60 Hz, our 3606 diesel generator sets are made to meet your mission critical, continuous, standby and prime applications. We’ve designed each to ISO 8528-5 transient response requirements and to accept 100% rated load in one step. The generator set is certified for low fuel consumption.
Cat
3606 Generator Set (Medium Speed)
Specifications
-
Generator Set Specifications
Spec Value Maximum Rating 2000 ekW Minimum Rating 1650 ekW Emissions/Fuel Strategy Low Fuel Consumption Frequency 60 Hz Speed 900 rpm Duty Cycle Standby, Prime, Continuous -
Engine Specifications
Spec Value Engine Model 3606 I-6,4-Stroke Water-Cooled Diesel Bore 11 in Stroke 11.8 in Displacement 111 in³ Compression Ratio 13:01 Aspiration TA Fuel System Direct unit injection Governor Type Generator Set Monitoring System (GMS) -
Generator Set Dimensions
Spec Value Length - Maximum 404 in Width - Maximum 99.62 in Height - Maximum 156.6 in Dry Weight - Genset (maximum) 74970 lb
Standard Equipment
Air Inlet System
- Breather, crankcase, top-mounted
- Aftercooler, fresh water, corrosion resistant coated (air side)
- Turbocharger, watercooled (720 rpm and HFO), engine oil lubricated
- Air inlet shutoff
Cooling System
- Jacket water thermostats
- Engine coolant water drains
- Water temperature regulator
Exhaust System
- 457 mm (18 in) Cat bolt pattern
- Includes adapter, flexible exhaust fitting
- Dry, gas tight, exhaust manifold
Fuel System
- Simplex or duplex
Generator System
- Custom generator per generator data sheet completed by dealer
Governor System
- UG Actuator
Lube System
- Centrifugal oil filters with single shutoff
- Oil pressure regulating valve
- Service side engine mounted on cylinder block inspection covers
- Oil filler and dipstick
- Crankcase explosion relief valves
- Wet oil sump. Includes engine-driven main lubrication and oil pumps, oil lines and oil pan
Mounting System
- Damper, torsional vibration
- Engine and generator mounting
Starting / Charging System
- Vane type air starter
- One motor, engine mounted at rear, on left side
- Air silencer
- Line group for single point custom connection
General:
- Paint, Caterpillar yellow
- Gear driven pumps: Fuel/oil/jacket water/aftercooler/Oil cooler water
Optional Equipment
Air Inlet System
- Air inlet adapter
- Air cleaner
- Vertical support bracket
- Heavy duty air cleaner
- Boost control valve
- Air cleaner louver assembly
- Soot filter
Cooling System
- Heating aids
- Cooling system aids
- Expansion tank
- Auxiliary water pump
Exhaust System
- Weld flange and related hardware
- Flexible exhaust fittings
Fuel System
- Duplex primary fuel strainer
- Fuel priming pump
- Fuel system connections
Generator System
- Class F insulation
- 3 Phase, six Leads, WYE
- Busbar connections
- Anti-condensation space heaters
- Winding temperature detectors
Governor System
- EGB actuator
- 723 Plus
- Electronic/actuators
- Battery backup/power supply
- Digital programmers
- 2301 A load share
Lube System
- Oil pan drain valve
- Lube ANSI adapter (Emergency connection)
Mounting System
- Vertically restrained
- Isolator
- Spring type vibration isolators
- Non-vertically restrained
Starting / Charging System
- Compressed air flex hose
- Pressure reducing valve
General:
- Custom paint colors