Skip to main content Skip to navigation
Ag Agriculture Blog IconBehind the Scenes Blog IconConstruction Blog IconEquipment Maintenance Blog Icon Power Systems Blog Icon Thumbs Down Thumbs Up! Small Business Blog IconTachnology Blog Icon Constructioncontrol-smallcost-smallefficiency-smallflexibility-smallHoursHours Location HoursMapMapMenu AgMenu AttachmentsMenu BlogMenu CareersMenu ChecklistMenu ConstructionMenu MaintenanceMenu NewMenu PowerMenu RebuildsMenu RentMenu ServiceMenu TechnologyMenu TestimonialsMenu Training Menu Truck Menu UsedNewArtboard 1Parts Phone Phone PhonePower Systemsproductivity-smallRentalRepSafetyServiceSpecialsTechtestimonial-iconToolsTrainingTruckUsed

Cat

C1.1 Generator Set

Maximum Rating

9.5 kVA

Minimum Rating

6.8 kVA

Emissions/Fuel Strategy

R96/EUIIIa Equivalent

Overview

Producing reliable power from 6.8 to 9.5 kVA at 50 Hz, our C1.1 diesel generator sets designed to ISO 8528-5 transient response requirements. All C1.1 generator sets are R96/EUIIIa equivalent emissions compliant.

Photos

360° View

Exterior

Enclosure

Features

Specifications

  • Generator Set Specifications
    Spec Value
    Maximum Rating 9.5 kVA
    Minimum Rating 6.8 kVA
    Emissions/Fuel Strategy R96/EUIIIa Equivalent
    Voltage 110 to 415 Volts
    Frequency 50 Hz
    Speed 1500 rpm
    Duty Cycle Standby, Prime
  • Engine Specifications
    Spec Value
    Engine Model C1.1, In-line 4 4-cycle diesel
    Bore 3 in
    Stroke 3.2 in
    Displacement 69 in³
    Compression Ratio 23.0:1
    Aspiration Naturally Aspirated
    Fuel System Indirect Injection
    Governor Type Mechanical
  • Generator Set Dimensions
    Spec Value
    Length - Maximum 55.1 in
    Width - Maximum 24.4 in
    Height - Maximum 39.2 in

Standard Equipment

Air Inlet System

  • Air cleaner; light duty with disposable element

Control Panel

  • GCCP1.3 control panel

Cooling System

  • Caterpillar extended life coolant
  • Coolant drain line with valve
  • Fan drive, battery charging alternator drive
  • Radiator and cooling fan with guards

Exhaust System

  • Stub pipe, gaskets, raincap & SAE exhaust flange for customer use; shipped loose

Fuel System

  • Base, formed steel with single wall integral 8-hour fuel tank
  • Standard open set fuel tank / base supplied

General

  • Engine and alternator pre-paint, Caterpillar yellow

Generators and Generator Attachments

  • 12 Leads
  • Circuit breaker, IEC, 3 pole, mounted in tower panel
  • IP23 Protection
  • Segregated low voltage (AC/DC) wiring panel
  • Tower panel, IP22, bottom cable entry
  • Voltage regulator (single phase sensing)

Governing System

  • Mechancial governing system

Lube System

  • Lubricating oil
  • Oil drain line with valve

Mounting System

  • Anti-vibration mounts
  • Captive linear vibration isolators between base and engine-generator
  • Includes lifting provisions and termination points for coolant
  • Skidbase as standard

Starting / Charging System

  • 12 Volt battery with rack and cables

Optional Equipment

Alternator Options

  • Coastal insulation protection

Certificates

  • European upgrade to STD set for CE certificate
  • Global certification for CIS

Circuit Breakers

  • 4 Pole circuit breaker
  • Pad-lockable breaker device

Control Panel

  • Battery charger
  • Emergency stop with key

Cooling System

  • Coolant heater

Enclosures

  • Single point lift for enclosure
  • Sound attenuated enclosure (GALV)

Fuel System

  • Low fuel level alarm

General

  • Packing case - canopied set
  • Packing case - compact set
  • Radiator stone guard

Mounting Options

  • Battery removal
  • Industrial silencer removal
  • Silencer installation kit

Special Test and Inspection

  • PGS test report @1.0 power factor