2018 CAT 140M3AWD
Details
- Price: $170,000
- Location: SHAKOPEE, MN, US
- Serial number: N9J00783
- Stock number: EQ0145190
- Hours: 6,203 hours
Contact
- Mikel Haugh
- 952.843.3582
Mikel.Haugh@zieglercat.com
Comments
Features
- 140M3 AWD MOTOR GRADER
- 17.5 X 25 TIRES
- ADVANCED JOYSTICKS
- ANTIFREEZE WINDSHIELD WASHER
Condition
-
GENERAL CONDITION
Item Condition ET Product Status Report Download Yes Logged / Active Codes Yes Machine Starts and is Operable Yes Tires are Aired Up and Drivable Yes Visible Oil Leaks No Body Frame - GENERAL CONDITION General -
GENERAL APPEARANCE
Item Condition Cleaning Required No Battery Box Cab or Canopy Decals Draw Bar Engine Enclosures Fenders Both front plastic fenders are broken.
Front Frame Welds Fuel Tank Grab Irons Hood Paint Pre-Cleaner Bowl Radiator Grill Rear Frame Welds Sheet Metal Steps / Ladder Left bottom step is bent.
-
SAFETY ITEMS
Item Condition Parking Brake Functioning Yes ROPS Certification Plate Yes Safety Decals In Place Yes Safety Decals Legible Yes Safety Locks / Pins Yes
Articulation lock pin is missing retainer pin.Service Brakes Functioning Yes Back Up Alarm Beacon / Strobe Camera(s) Horn ROPS Seat Belt / Date Secondary Exit -
OPERATOR STATION
Item Condition Current O&MM Yes Air Conditioner A/C is working but performance is poor only blowing 62 degrees.
Armrests Cab Filter / Heat Vent Louvres Dash Console Door Latches / Hinges / Seals Floor Boards / Mats Gauges Headliner Heater / Defroster Hour Meter - GAUGES, OPERATION STATION, CONSOLE Hydraulic Controls Interior Lights Orange light is inop
Interior Plastic / Fabric Mirrors Monitoring Display Pans/Guards Radio Seat Cushions / Suspension / Type Seat suspension boot is torn.
Switches Transmission Controls Visor / Sunshade Windows Windshield Wipers -
ENGINE
Item Condition Apparent Other Engine Damage No Blow By No Fuel Leaks No Knocking No Oil Leaks No Service Needed Yes
No dates on filters or sticker in cab. Looked up service history and there is no PM on record.Water in Oil No Oil Pressure (H/L/N) Good Smoke Color (B/D/L/W) None Belts / Pulleys - ENGINE Engine Oil Level / Condition Oil level is overfull. Doesn’t smell like fuel. Recommend sampling. Last oil sample from November came back with high fuel dilution.
Engine Supports / Mounts Exhaust / Muffler / Stack Fuel Injection System Looking at past service history machine has had multiple fuel system related codes. Performed fuel system function test and fuel pump failed test for fuel flow to low
Governor Intake / Air Filters Operating Condition - ENGINE Other Turbocharger / Blower -
EMISSIONS
Item Condition Aftertreatment System Codes No Leaks / Type No Aftertreatment Heat Shields / Guards DEF Lines / Wiring Diesel Particulate Filter (DPF) Condition / Service Hours DPF ash service was performed at 5107 hours
-
COOLING SYSTEM
Item Condition Compression in Radiator No Coolant Leaks No Oil in Anti-Freeze No Standard Radiator Yes Anti-Freeze Level / Color / Condition Coolant is low. No leaks found
Belts / Pulleys - COOLING SYSTEM Coolers Fan Fan Drive / Type Fan Shrouds / Guards Hoses / Tubes Radiator Water Pump -
ELECTRICAL, STARTING AND CHARGING SYSTEM
Item Condition Active Codes No Block Heater Yes Ether Aid Yes Jump Start Terminal Yes Signal Lights Yes Alternator Batteries / Cables Pre-Heater Product Link / Condition Starter Wiring Work Lights Top work light is out. Both reverse lights are inop. Front headlight have water inside.
-
TRANSMISSION
Item Condition Auto Shift Yes Leaks - TRANSMISSION No Powershift Yes Transmission - Noisy Yes
Transmission has cavitation noise at higher RPM sound like air moving through the pump. Transmission is operating normally.Case - TRANSMISSION Controls - TRANSMISSION Cooler Lines / Fittings - TRANSMISSION Operating Condition - TRANSMISSION Transmission had active code 674-2 for speed sensor active when starting the machine but went away after shutting off and starting again. Code has had 21 occurrences in the last 100 hours.
Pump - TRANSMISSION Seals Temp / Pressure Gauges Transmission - Forward Shifts Transmission - Reverse Shifts Transmission Oil Filter Condition / Service Hours Last service is unknown
Valves -
ALL WHEEL DRIVE
Item Condition All Wheel Drive Lines / Fittings All Wheel Drive Operating Condition All Wheel Drive Valve Controls / Settings Drive Motors Final Drives / Oil Levels Both front final are over full. Oil looks thin like hydraulic oil. Recommend sampling. Possible motor seal leak.
Pump -
STEERING
Item Condition Articulate P & B King Pins King pins have 1/8" of up down play
Lines / Fittings Steering Cylinder Steering Frame Steering Linkage Steering Operating Condition Steering Pump Steering Valve Supplemental Steering Tie Rods / Rod Ends Wheel / Joystick Wheel Lean Cylinder - STEERING -
DRIVECHAIN / TANDEMS
Item Condition Differential Differential Lock / Operation Drivetrain / Tandem Leaks Oscillating Hubs / Oil Level Planetary Tandem Housing / Drive Chains Wheel Lugs & Rims Front right wheel is missing valve stem cap
-
HYDRAULICS
Item Condition Leaks - HYDRAULICS Yes Blade Cushion Circle Drive Box Circle Side Shift Cylinder Cylinder Mounts / Pins Hydraulic Lines / Fittings Hose clamp on circle side shift cylinder needs to be re positioned. Line on wing quick connect fitting is leaking at pipe thread. Line on rear control valve on front frame has level 3 leak. T fitting on front lift has level 2 leak.
Hydraulic Oil Filter Condition / Service Hours Last service is unknown
Hydraulic Pump Hydraulic Valves Lift Cylinders Front hitch lift cylinder is leaking.
Linkage Operating Condition - HYDRAULICS Saddle Pin / Actuator Pin works
Side Shift Cylinder Tank / Sight Glass / Cap Tip Cylinder -
BLADE
Item Condition Circle A Frame Circle Frame Circle Shoes / Inserts Circle has 1/4” of up and down play recommend adding shims. Side to side play is minimal but could be tightened up a little.
Cutting Edge Carbide cutting edges.
Cylinder Balls / Caps All cylinder ball caps have 3/16” of play. Recommend removing shims
Face / Moldboard Frog / Base Edge Moldboard Tip Brackets / Inserts 1/4” of play on all four. Recommend adjustment
Ring Gear Saddle Tip Bracket Pivots / Bearings Pivot pins and bushings have 3/16” of play. Still functional but could be replaced.
-
SNOW WING
Item Condition Blade / Moldboard Cutting Edges Cylinder Condition Mast / Mounts / Supports Operating Condition - SNOW WING Rear Post / Mount Snow Wing Lines / Fittings -
TIRES
Item Condition Bias No Radial Yes Tire Size - TIRES 17.5 R25 Left Center Recapped No Tread Cuts Chunks No Side Cuts Section No Left Front Recapped No Tread Cuts Chunks No Side Cuts Section No Left Rear Recapped No Tread Cuts Chunks No Side Cuts Section No Right Center Recapped No Tread Cuts Chunks No Side Cuts Section No Right Front Recapped No Tread Cuts Chunks No Side Cuts Section No Right Rear Recapped No Tread Cuts Chunks No Side Cuts Section No

RADIO
STROBE
ENG COOL HEATER
FRONT & REAR FENDERS
14′ MOLDBOARD
REAR CAMERA
SNOW ARRANGEMENT
HEATED SEAT
PROD LINK, BASE + 6
ADVANCED JOYSTICKS
GRADE CONTROL X SLOPE
17.5 X 25 TIRES
FALLS SHORT POST HYD 12 FT WING
FRONT FALLS PARALIFT HITCH