Cat C280-6 Marine Generator Set
Caterpillar
Cat C280-6 Marine Generator Set
Photos
Specifications
-
Generator Set Specifications
Spec Value Minimum Rating 1760 ekW (2200 kVA) Maximum Rating 1820 ekW (2275 kVA) Frequency 50 Hz or 60 Hz Speed 1000 rpm (50 hz) or 900 rpm (60 hz) Emissions/Fuel Strategy EPA Tier 2, IMO II -
Engine Specifications
Spec Value Aspiration Turbocharged-Aftercooled Bore 11 in Stroke 11.8 in Displacement 6773 in³ Governor Type Electronic Fuel System EUI Compression Ratio 50 Hz 13.1 Compression Ratio 60 Hz 13:1 Engine Model In-line 6, 4-Stroke-Cycle Diesel -
Generator Set Dimensions
Spec Value Length 280.3 in Width 77.2 in Height 154.9 in Weight - Estimated 18000 lb
Standard Equipment
Air Inlet System
- Aftercooler — fresh water, corrosion resistant coated (air side); air inlet shutoff; breather — crankcase, top-mounted; turbocharger — engine oil lubricated
Control System
- Single Caterpillar® A3 electronic control unit (ECU) with electronic unit injector fuel system, rigid wiring harness (10 amp, 24 volt power required to drive ECUs)
Cooling System
- Engine coolant water drains
Exhaust System
- Dry, gas tight, exhaust manifold
Fuel System
- Distillate fuel (requires viscosity ranging from 1.4 cSt to 20 cSt at 38° C), fuel transfer pump (mounted on left-hand side), duplex fuel filters, electronically controlled unit injectors
Lube Oil System
- Centrifugal oil filters with single shutoff, service side engine mounted on cylinder block inspection covers includes installed oil lines and single shutoff valve, filters centrifuge bypass oil from the main lubricating oil pump, can be serviced with the engine running, oil filler and dipstick valve, oil pressure regulating valves, crankcase explosion relief valves
General
- Caterpillar yellow paint; gear-driven pumps: fuel, oil, jacket water, aftercooler/oil cooler water; service literature