Skip to main content Skip to navigation
AgAgriculture Blog IconBehind the Scenes Blog IconConstruction Blog IconEquipment Maintenance Blog IconPower Systems Blog Icon Thumbs Down Thumbs Up! Small Business Blog IconTachnology Blog IconConstructioncontrol-smallcost-smallefficiency-smallflexibility-smallHoursHours Location HoursMapMapMenu AgMenu AttachmentsMenu BlogMenu Blog Menu CareersMenu ChecklistMenu ConstructionMenu MaintenanceMenu NewMenu PowerMenu RebuildsMenu RentMenu ServiceMenu TechnologyMenu TestimonialsMenu Training Menu Truck Menu UsedNewArtboard 1Parts Phone PhonePower Systemsproductivity-smallRentalRepSafetyServiceSpecialsTechtestimonial-iconToolsTrainingTruckUsed

Ziegler CAT

Caterpillar

Cat® 3516C Industrial Diesel Engine

The Cat® 3516C is offered at 1506 bkW (2100 bhp) @ 1750 rpm. This engine is available using EPA (U.S.) Flex provisions and for other global regulated and non-regulated areas. The 3516C offers unsurpassed performance and durability in a multitiude of industries and applications, including Bore and Drill Rigs, Chippers, Grinders, and Shredders, Cranes, Dredgers, Forestry, Material Handling, Mining and Pumps.

Photos

360° View

Exterior

360° Exterior view. Double click on the image to zoom in on any area of the product.

Features

Specifications

  • Power Rating
    Spec Value
    Maximum Power 2100 HP
    Maximum Torque 7563 lb-ft @ 1300 rpm
    Rated Speed 1750 rpm
    Minimum Power 2100 HP
  • Emission Standards
    Spec Value
    Emissions U.S. EPA Tier 2 Nonroad Equivalent Emission Standards (Not Currently EPA Certified)
  • General
    Spec Value
    Engine Configuration V-16, 4-Stroke-Cycle Diesel
    Bore 6.7 in
    Stroke 8.5 in
    Displacement 4760 in³
    Compression Ratio 14.7:1
    Aspiration Turbocharged Aftercooled
    Rotation from Flywheel End Counterclockwise
    Aftertreatment -
  • Engine Dimensions - Approximate
    Spec Value
    Length 129.1 in
    Width 60.2 in
    Height 81.2 in
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments 17284 lb

Standard Equipment

Air Inlet System

  • Air to Air Aftercooled (ATAAC)
  • Four turbochargers, center mounted

Control System

  • ADEM A4 ECM Electronic Engine Control, RH (10 amp DC power required)

Cooling System

  • Thermostats and housing
  • Gear driven centrifugal jacket water pump
  • Connections for radiator cooling

Exhaust System

  • Exhaust manifold, dry
  • Four turbochargers with watercooled bearings
  • Two exhaust outlets, 203 mm (8 in) round flange

Flywheels and Flywheel Housing

  • SAE No. 00 flywheel (183 teeth)
  • SAE No. 00 flywheel housing

Fuel System

  • Fuel filter, LH spin-on type
  • Fuel transfer pump
  • Electronically controlled unit injectors

Instrumentation

  • No standard instrument or gauge panel

Lube System

  • Crankcase breather, top mounted
  • Oil cooler
  • Oil filler and dipstick, LH
  • Oil pump
  • Oil filter, LH, spin-on type
  • Front sump oil pan, 500-hour change interval

Mounting System

  • Trunnion front support

Power Take Off

  • Front housing, two-sided

Protection System

  • ADEM A4 ECM monitoring system to provide customer programmable engine
  • Deration strategies to protect against adverse operating conditions
  • Emergency stop logic inputs provided at 40 pin customer interface connection

Starting System

  • Dual 24V electric starting motor, LH, unwired

General

  • Paint: Caterpillar yellow
  • Vibration damper
  • Lifting eyes