2022 CAT 249D3 1,343 engine hrs
Condition
| ET Product Status Report Download | Yes | |
|---|---|---|
| Logged / Active Codes | No | |
| Machine Starts and is Operable | Yes | |
| S.O.S. (All Compartments) | No | |
| VIDS/VIMS Download Available | No | |
| Visible Oil Leaks | No | |
| Body | ||
| Frame | ||
| General | Small dents and dings and some small rust spots |
| Cleaning Required | Yes | |
|---|---|---|
| Bumper | ||
| Cab or Canopy | ||
| Counterweight | ||
| Crankcase Guard / Battery Box | ||
| Decals | ||
| Eng. Enclose Hood / Stack | ||
| Fuel Tank | ||
| Grab Irons | Can handle bent/dented | |
| Main Frame Welds | ||
| Paint | ||
| Pre-Cleaner Bowl | ||
| Radiator Grill & Shroud | Cooler guard bent up slightly in the middle and and hinge mounts are bent. Strut mount on guard is bent and strut dosnt keep guard up. | |
| Sheet Metal | Covers at front of loader arms dented and scratched | |
| Steps / Ladder | Coupler step bent. Can step bent upwards slightly |
| Parking Brake Functioning | Yes | |
|---|---|---|
| ROPS Certification Plate | Yes | |
| Safety Decals In Place | Yes | |
| Safety Decals Legible | Yes | |
| Back Up Alarm | ||
| Camera(s) | ||
| Dead Engine Lowering Valve | ||
| Horn | ||
| ROPS | ||
| Safety Locks / Pins | ||
| Seat Belt / Date | ||
| Secondary Exit |
| Fuel Level - OPERATOR STATION | 7/8 | |
|---|---|---|
| Current O&MM | Yes | |
| Current Parts Manual | No | |
| Current Safety Manual | Yes | |
| Sound Proofing | Yes | |
| Air Conditioner | ||
| Armrests | ||
| Cab Filter / Heat Vent Louvres | Two vent louvre a on right side don’t fully open | |
| Dash Console | ||
| Door Latches / Hinges / Seals | Bottom of door seal starting to pull off | |
| Floor Boards / Mats | Hole in floor in front of left foot position | |
| Gauges | ||
| Headliner | ||
| Heater / Defroster | ||
| Hour Meter - GAUGES, OPERATION STATION, CONSOLE | ||
| Hydraulic Controls | ||
| Interior Lights | ||
| Interior Plastic / Fabric | ||
| Mirrors | ||
| Monitoring Display | ||
| Pans/Guards | ||
| Radio | ||
| Seat Cushions / Suspension / Type | ||
| Switches | ||
| Visor / Sunshade | ||
| Windows | ||
| Windshield Wipers |
| Apparent Other Engine Damage | No | |
|---|---|---|
| Blow By | No | |
| Emissions Decal Legible | Yes | |
| Fuel Leaks | No | |
| Has Engine been rebuilt? | No | |
| Knocking | No | |
| Oil Leaks | No | |
| Pre Lube System | No | |
| Service Needed | No | Fresh PM |
| Water in Oil | No | |
| Engine S/N | J31j01317 | |
| Oil Pressure (H/L/N) | N | |
| Smoke Color (B/D/L/W) | None | |
| Belts / Pulleys - ENGINE | Both belts starting to crack | |
| Engine Oil Level / Condition | ||
| Engine Supports / Mounts | ||
| Exhaust / Muffler / Stack | ||
| Fuel Injection System | ||
| Intake / Air Filters | ||
| Operating Condition - ENGINE | ||
| Turbocharger / Blower |
| Aftertreatment System Codes | No | |
|---|---|---|
| Leaks / Type | No | |
| Aftertreatment Heat Shields / Guards | ||
| Diesel Particulate Filter (DPF) Condition / Service Hours |
| Compression in Radiator | No | |
|---|---|---|
| Coolant Leaks | No | |
| Folded Core Radiator | No | |
| Modular Radiator | No | |
| Oil in Anti-Freeze | No | |
| Sand Blast Grid | No | |
| Standard Radiator | Yes | |
| Anti-Freeze Level / Color / Condition | ||
| Belts / Pulleys - COOLING SYSTEM | ||
| Coolers | ||
| Fan | ||
| Fan Drive / Type | ||
| Fan Shrouds / Guards | ||
| Hoses / Tubes | ||
| Radiator | ||
| Water Pump |
| Block Heater | Yes | |
|---|---|---|
| Ether Aid | No | |
| Alternator | ||
| Batteries / Cables / Master Disconnect | ||
| Lighting | ||
| Pre-Heater | ||
| Starter | ||
| Wiring |
| Magnetic Plugs Removed & Checked? | No | |
|---|---|---|
| Housings, Left | ||
| Housings, Right | ||
| Lines / Linkages | ||
| Operating Condition | ||
| Planetaries / Differential, Left | ||
| Planetaries / Differential, Right | ||
| Torsion Axles | ||
| Travel Controls | ||
| Travel Motors | ||
| Travel Pumps |
| Leaks - HYDRAULICS | No | |
|---|---|---|
| Detent Switch | ||
| Hoses / Lines | Aux hose clamps loose at back of frame and loader arms. Zip tie clamp cut under cab | |
| Lift Cylinders | ||
| Overall Operating Condition - HYDRAULICS | ||
| Pump & Valves | ||
| Tank | ||
| Tilt Cylinder |
| Notes - BUCKET | Side step bent | |
|---|---|---|
| Bucket Bottom | ||
| Bucket Linkage | ||
| Bucket Sides | ||
| Cutting Edges | Corners of cutting eagle worn to bucket. Edge can be flipped | |
| Loader Frame | ||
| Loader Pins & Bushings | ||
| Quick Coupler |
| Percentage Worn | 40% | |
|---|---|---|
| Track / Belt Width | 16” | |
| Idlers | ||
| Roller | ||
| Roller Frame | ||
| Sprocket | ||
| Track / Belt Condition | ||
| Tread Depth |
Left Measurement: 17mm Left Percent Worn: 40% Right Measurement: 17mm Right Percent Worn: 40% |
Features