2022 CAT 299D3 604 engine hrs
Condition
| ET Product Status Report Download | Yes | |
|---|---|---|
| Logged / Active Codes | No | |
| Machine Starts and is Operable | Yes | |
| S.O.S. (All Compartments) | No | |
| VIDS/VIMS Download Available | No | |
| Visible Oil Leaks | No | |
| Body | ||
| Frame | ||
| General |
| Cleaning Required | No | |
|---|---|---|
| Bumper | NA | |
| Cab or Canopy | ||
| Counterweight | NA | |
| Crankcase Guard / Battery Box | ||
| Decals | ||
| Eng. Enclose Hood / Stack | ||
| Fenders | NA | |
| Fiberglass | ||
| Fuel Tank | ||
| Grab Irons | ||
| Main Frame Welds | ||
| Paint | ||
| Plastic | ||
| Pre-Cleaner Bowl | ||
| Radiator Grill & Shroud | ||
| Sheet Metal | ||
| Steps / Ladder |
| Parking Brake Functioning | Yes | |
|---|---|---|
| ROPS Certification Plate | Yes | |
| Back Up Alarm | ||
| Camera(s) | ||
| Dead Engine Lowering Valve | ||
| Fire Extinguisher | NA | |
| Fire Suppression System | NA | |
| Horn | ||
| Rig Saver | ||
| ROPS | ||
| Safety Locks / Pins | ||
| Seat Belt / Date | Refer to picture | |
| Secondary Exit |
| Diesel Exhaust Fluid (DEF) Level - OPERATOR STATION | 50% | |
|---|---|---|
| Fuel Level - OPERATOR STATION | 50% | |
| Current O&MM | Yes | |
| Current Parts Manual | Yes | |
| Current Safety Manual | Yes | |
| Sound Proofing | Yes | |
| Air Conditioner | ||
| Armrests | ||
| Cab Filter / Heat Vent Louvres | ||
| Dash Console | ||
| Door Latches / Hinges / Seals | ||
| Floor Boards / Mats | ||
| Gauges | ||
| Headliner | ||
| Heater / Defroster | ||
| Hour Meter - GAUGES, OPERATION STATION, CONSOLE | ||
| Hydraulic Controls | ||
| Interior Lights | ||
| Interior Plastic / Fabric | ||
| Mirrors | ||
| Monitoring Display | ||
| Pans/Guards | ||
| Radio | ||
| Seat Cushions / Suspension / Type | Air suspension | |
| Switches | ||
| Visor / Sunshade | NA | |
| Windows | ||
| Windshield Wipers |
| Apparent Other Engine Damage | No | |
|---|---|---|
| Blow By | No | |
| Emissions Decal Legible | Yes | |
| Fuel Leaks | No | |
| Has Engine been rebuilt? | No | |
| Knocking | No | |
| Oil Leaks | No | |
| Pre Lube System | No | |
| Service Needed | No | Fesh 1000 hour PM completed. |
| Water in Oil | No | |
| Engine S/N | 2NC1743 | |
| Hours On Engine | 817 hrs | |
| Oil Pressure (H/L/N) | Normal | |
| Smoke Color (B/D/L/W) | Normal | |
| Belts / Pulleys - ENGINE | ||
| Engine Oil Level / Condition | Good level & condition | |
| Engine Supports / Mounts | ||
| Exhaust / Muffler / Stack | ||
| Fuel Injection System | ||
| Governor | ||
| Intake / Air Filters | ||
| Operating Condition - ENGINE | ||
| Other | ||
| Turbocharger / Blower |
| Aftertreatment System Codes | No | |
|---|---|---|
| Leaks / Type | No | |
| Aftertreatment Heat Shields / Guards | ||
| DEF Lines / Wiring | ||
| Diesel Exhaust Fluid (DEF) Tank | ||
| Diesel Particulate Filter (DPF) Condition / Service Hours |
| Compression in Radiator | No | |
|---|---|---|
| Coolant Leaks | No | |
| Folded Core Radiator | No | |
| Modular Radiator | No | |
| Oil in Anti-Freeze | No | |
| Sand Blast Grid | No | |
| Standard Radiator | Yes | |
| Current Hours on Radiator | 821 hrs | |
| Anti-Freeze Level / Color / Condition | Levels are good & coolant in good condition | |
| Belts / Pulleys - COOLING SYSTEM | NA | |
| Coolers | ||
| Fan | ||
| Fan Drive / Type | Hydraulic | |
| Fan Shrouds / Guards | ||
| Hoses / Tubes | ||
| Radiator | ||
| Water Pump |
| Block Heater | Yes | |
|---|---|---|
| Ether Aid | No | |
| Alternator | ||
| Batteries / Cables / Master Disconnect | ||
| Lighting | ||
| Pre-Heater | ||
| Starter | ||
| Wiring |
| Leaks - HYDRAULICS | No | |
|---|---|---|
| Detent Switch | ||
| Filter Condition (CUT) | ||
| Hoses / Lines | ||
| Lift Cylinders | ||
| Overall Operating Condition - HYDRAULICS | ||
| Pump & Valves | ||
| Tank | ||
| Tilt Cylinder |
| Overall Operating Condition - ATTACHMENTS / WORK TOOLS |
|---|
| Bucket Capacity | 0.82 cubic yds | |
|---|---|---|
| Bucket S/N | A421ABC20258 | |
| Bucket Bottom | ||
| Bucket Linkage | ||
| Bucket Sides | ||
| Loader Frame | ||
| Loader Pins & Bushings | ||
| Quick Coupler | ||
| Teeth / Adapters |
| Percentage Worn | 50% | |
|---|---|---|
| Track / Belt Tread Thickness | 0.55” | |
| Track / Belt Width | Track Forging Width: 1.55”85% life remaining | |
| Idlers | ||
| Roller | ||
| Roller Frame | ||
| Sprocket | ||
| Track / Belt Condition | 50% | |
| Tread Depth |
Left Measurement: 0.55” Left Percent Worn: 50% Right Measurement: 0.57” Right Percent Worn: 50% |
Comments
Features