2010 DEERE & CO. 200D 9,328 engine hrs
Condition
| Logged / Active Codes | No | |
|---|---|---|
| Machine Starts and is Operable | Yes | |
| Visible Oil Leaks | No | |
| Body | ||
| Frame | ||
| General |
| Notes - GENERAL APPEARANCE | For the hours machine appearance is good. | |
|---|---|---|
| Bumper | ||
| Car Body | ||
| Catwalk | ||
| Counterweight | ||
| Crankcase Guard / Battery Box | ||
| Decals | ||
| Draw Bar | ||
| Eng. Enclose Hood / Stack | ||
| Engine Doors | ||
| Fuel Tank | ||
| Grab Irons | Grab iron on right side is missing. | |
| Hood | ||
| Main Frame Welds | ||
| Paint | ||
| Pre-Cleaner Bowl | ||
| Radiator Grill & Shroud | ||
| Sheet Metal | Bottom belly pans are missing. Pump compartment belly pan is bent. | |
| Steps / Ladder | Right rear step is bent. Left front step is bent. |
| ROPS | Yes | |
|---|---|---|
| ROPS Certification Plate | Yes | |
| Safety Decals In Place | Yes | |
| Safety Decals Legible | Yes | |
| Horn | ||
| Seat Belt / Date | ||
| Secondary Exit | ||
| Travel Alarm |
| Current O&MM | Yes | |
|---|---|---|
| Air Conditioner | ||
| Armrests | ||
| Cab Filter / Heat Vent Louvres | Front louver is broken. | |
| Dash Console | ||
| Door Latches / Hinges / Seals | ||
| Floor Boards / Mats | ||
| Gauges | ||
| Headliner | ||
| Heater / Defroster | ||
| Hour Meter - GAUGES, OPERATION STATION, CONSOLE | ||
| Hydraulic Controls | ||
| Interior Lights | ||
| Mirrors | ||
| Monitoring Display | ||
| Pans/Guards | ||
| Radio | ||
| Seat Cushions / Suspension / Type | Seat headrest is torn. | |
| Switches | ||
| Travel Controls (Type) | ||
| Windows | ||
| Windshield Wipers | Wiper arm is missing. |
| Apparent Other Engine Damage | No | |
|---|---|---|
| Blow By | No | Normal for hours. |
| Fuel Leaks | No | |
| Knocking | No | |
| Oil Leaks | Yes | Engine oil pan and Turbocharger oil return line, level 2 leak. |
| Water in Oil | No | |
| Notes - ENGINE | Engine seems to run good other than exhaust leaks. | |
| Oil Pressure (H/L/N) | Good | |
| Smoke Color (B/D/L/W) | Normal | |
| Belts / Pulleys - ENGINE | ||
| Engine Oil Level / Condition | ||
| Engine Supports / Mounts | ||
| Exhaust / Muffler / Stack | Exhaust manifold is leak | |
| Fuel Injection System | ||
| Governor | ||
| Intake / Air Filters | ||
| Operating Condition - ENGINE | ||
| Other | ||
| Turbocharger / Blower |
| Compression in Radiator | No | |
|---|---|---|
| Coolant Leaks | No | |
| Oil in Anti-Freeze | No | |
| Standard Radiator | Yes | |
| Anti-Freeze Level / Color / Condition | ||
| Belts / Pulleys - COOLING SYSTEM | ||
| Coolers | ||
| Fan | ||
| Fan Drive / Type | ||
| Fan Shrouds / Guards | ||
| Hoses / Tubes | ||
| Radiator | ||
| Water Pump |
| Ether Aid | Yes | |
|---|---|---|
| Alternator | ||
| Batteries / Cables / Master Disconnect | ||
| Lighting | ||
| Pre-Heater | ||
| Starter | ||
| Wiring |
| Boom Cylinder | ||
|---|---|---|
| Bucket Cylinder | ||
| Control Linkage | ||
| Hose Lines | ||
| Hydraulic Swivel | ||
| Operating Condition - HYDRAULICS | ||
| Pump Drive | ||
| Pumps & Valves | ||
| Rotex | ||
| Stick Cylinder | ||
| Swing Gear | ||
| Swing Motors | Swing drive has level 1 leak. | |
| Tank | ||
| Travel Motors |
| Boom Condition | ||
|---|---|---|
| Boom Pins | ||
| Pins & Bushings - BOOM | Boom to machine has 1/16” of play. |
| Pins & Bushings - STICK | Stick to boom pin has 1/16”-1/8” of play | |
|---|---|---|
| Stick Conditions |
| Quick Coupler | No | |
|---|---|---|
| Brand | Raveling | |
| Width | 75yd. 36” | |
| Bucket Bottom | ||
| Bucket Linkage | Bucket linkage has 3/16” of play at bucket to stick joint and H-link joints. | |
| Bucket Mounts | ||
| Bucket Sides | ||
| Cutting Edges |
| Track Frame - Left | ||
|---|---|---|
| Track Frame - Right | ||
| Carrier Rollers Front |
Left Measurement: 114mm Left Percent Worn: 40% Right Measurement: 114mm Right Percent Worn: 40% |
|
| Carrier Rollers Rear |
Left Measurement: 114mm Left Percent Worn: 40% Right Measurement: 114mm Right Percent Worn: 40% |
|
| Idlers Front |
Left Measurement: 22mm Left Percent Worn: 30% Right Measurement: 22mm Right Percent Worn: 30% |
|
| Links |
Left Measurement: 102mm Left Percent Worn: 30% Right Measurement: 102mm Right Percent Worn: 30% |
|
| Pins & Bushings (External) |
Left Measurement: 55mm Left Percent Worn: 80% Right Measurement: 55mm Right Percent Worn: 80% |
|
| Pins & Bushings (Internal) |
Left Measurement: 768mm Left Percent Worn: 70% Right Measurement: 768mm Right Percent Worn: 70% |
|
| Segments |
Left Percent Worn: 60% Right Percent Worn: 60% |
|
| Track Roller 1 |
Left Measurement: 144mm average Left Percent Worn: 40% Right Measurement: 144mm average Right Percent Worn: 40% |
|
| Track Shoe Grouser Height |
Left Measurement: 24mm Left Percent Worn: 20% Right Measurement: 24mm Right Percent Worn: 20% |
| Housings, Left | ||
|---|---|---|
| Housings, Right | ||
| Planetaries / Differential, Left | ||
| Planetaries / Differential, Right |
| comment 1 | Overall machine runs and operated smooth. Wear is normal for the hours. |
|---|
Comments
A/C
HEATER
LIGHTS
RADIO
36" RAVELING FBSC SAND BUCKET
ADDITIONAL 42" FBSC SAND BUCKET
Features