Cat C27 ACERT engines are the ideal solution for your demanding operations in the oilfield. Decades of field operation and intense research and development allow Cat C27 ACERT engines to deliver excellent performance with low operating costs and emissions. Equipment powered by C27 ACERT engines include well stimulation pumping, pump skids, nitrogen units, acidizing units, blenders, and hydraulic power units. Cat engines are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty. C27 ACERT engines, with ratings: 597-858 bkW (800-1150 bhp) @ 1800-2100 rpm, meet U.S. EPA Tier 2 equivalent emission standards. They are available using U.S. EPA Flexibility, and for other regulated and non-regulated areas.

C27 ACERT™ Dry Manifold Petroleum Engine

Features

  • Custom Packaging

    For any petroleum application, trust Caterpillar to meet your project needs with custom factory generator sets and mechanical packages. Cat engines, generators, controls, radiators, and transmissions can be custom designed and matched in collaboration with our local dealers to create unique solutions. Custom packages are globally supported and are covered by a one year warranty after startup.

  • Custom Packaging

    For any petroleum application, trust Caterpillar to meet your project needs with custom factory generator sets and mechanical packages. Cat engines, generators, controls, radiators, and transmissions can be custom designed and matched in collaboration with our local dealers to create unique solutions. Custom packages are globally supported and are covered by a one year warranty after startup.

  • Transmissions

    Caterpillar has a full line of engine-transmission packages that can be fully integrated with your axle, hydraulics, and operator interface. Cat transmissions deliver continuous operation under full load, smooth shifting at any speed, and maximum up time, with unmatched durability and easy maintenance

  • Full Range of Attachments

    Large variety of factory-installed engine attachments reduces packaging time

  • Testing

    Every engine is full-load tested to ensure proper engine performance.

  • Product Support Offered Through Global Cat Dealer

    – More than 2,200 dealer outlets – Cat factory-trained dealer technicians service every aspect of your petroleum engine – Cat parts and labor warranty – Preventive maintenance agreements available for repairbefore-failure options – S•O•SSM program matches your oil and coolant samples against Caterpillar set standards to determine: – Internal engine component condition – Presence of unwanted fluids – Presence of combustion by-products – Site-specific oil change interval

  • Over 80 Years of Engine Manufacturing Experience

    Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable products.

  • Over 80 Years of Engine Manufacturing Experience

    Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable products.

  • Web Site

    For all your petroleum power requirements, visit www.cat.com/oilandgas.

Specifications

Units for specifications

General Specifications

Maximum Rating 1050.0 BHP 782.0 bkW
Displacement 1658.0 in³ 27.2 l
Minimum Rating 800.0 BHP 596.0 bkW
Governor and Protection ADEM A3
Aspiration Turbocharged-Aftercooled
Flywheel and Flywheel Housing SAE No. 0 or SAE No. 1
Flywheel Teeth 136 (SAE No. 0), 113 (SAE No. 1)
Rotation from Flywheel End Counterclockwise
Stroke 6.0 in 152.4 mm
Bore 5.4 in 137.7 mm

Emissions

Emissions 2006 EPA and CARB Tier 2, and EC Stage II Non-Road emissions certified

Dimensions

Length 75.5 in 1918.0 mm
Width 57.6 in 1463.0 mm
Height 52.0 in 1321.0 mm
Weight 6382.0 lb 2895.0 kg

Capacity for Liquids

Cooling System 14.5 gal (US) 54.9 l

Standard Equipment

Air Inlet System

  • Dual turbochargers side or rear mounted — inlet 152.4 mm (6 in.) hose connection

Control System

  • Electronic governing, PTO speed control
  • Programmable ratings
  • Cold mode start strategy
  • Automatic altitude compensation
  • Power compensation for fuel temperature
  • Programmable low and high idle and TEL
  • Electronic diagnostics and fault logging
  • Engine monitoring and protection system (speed, temperature, pressure)
  • J1939 Broadcast (diagnostic, engine status, and control)

Cooling System

  • Thermostats and housing — outlet LH vertical orientation
  • Jacket water pump — gear-driven, centrifugal RH

Exhaust System

  • Exhaust manifold — dry, heat shields
  • Dual turbo — rear turbo exhaust, full marmon connection 127 mm (5 in.), maximum load 10 kg for direct
  • Water-cooled center sections

Flywheels and Flywheel Housings

  • SAE No. 0 or SAE No. 1
  • SAE standard rotation

Fuel System

  • MEUI system
  • Fuel filter, RH ( 2 micron high performance)
  • Fuel transfer pump
  • Fuel priming pump (optional electric priming pump)

Lube System

  • Crankcase breather — rear mounted
  • Oil cooler — RH
  • Side turbo — oil filler in RH front gear case
  • Rear turbo — oil filler in RH valve cover
  • Oil level gauge — RH
  • Oil filter — RH
  • Oil pan rear sump

Mounting System

  • Front support — narrow

Power Take-Offs

  • Crankshaft pulley — 203.2 mm (8 in), 5 grooves 15.9 mm (.63 in) wide; 292.1 mm (11.5 in.) 1 groove 15.9 mm (.63 in.) wide

General

  • Vibration damper
  • Paint — Cat yellow
  • Lifting eyes
  • Automatic variable timing, electronic
  • Electronic installation kit 70-pin connector (connectors, pins, sockets)

Optional Equipment

Air Inlet System

  • Air lines
  • Air cleaners
  • Precleaners

Charging System

  • Battery chargers
  • Charging alternators
  • Alternator mountings

Circuit Breakers

  • Circuit breaker mounting

Cooling System

  • Blower fans
  • Suction fans
  • Radiators

Exhaust System

  • Muffler

Fuel Systems

  • Electric fuel priming pump

Instrumentation

  • Gauges and instrument panels

Lube System

  • Lubricating oil
  • Oil pan
  • Oil filter

Mounting System

  • Engine supports

Power Take-Offs

  • Hydraulic pump drives
  • Pulley
  • Auxiliary drive

Starting System

  • Electric starting motor
  • Battery sets - 24V
  • Battery cable
  • Battery rack
  • Starting aids

Packaging

  • Overseas preservation
  • Storage preservation
  • Export packaging
C27 ACERT™ Dry Manifold Petroleum Engine

Documents