The line of G3520J engines brings versatility, uptime, and low operating cost to your gas compression operation. They deliver the lowest engine-out emissions in the industry without sacrificing performance. Ideal applications for G3520J engines include primary gathering, central gathering, and gas processing plants.
Features
-
Engine Design
- Built on G3500 LE proven reliability and durability
- Ability to burn a wide spectrum of gaseous fuels
- Robust diesel strength design prolongs life and lowers owning and sdfsoperating costs
- Broad operating speed range at lower site air density (high altitude/ sdfshot ambient temperatures)
- Higher power density improves fleet management
- Quality engine diagnostics
- Detonation-sensitive timing control for individual cylinderst temperatures)
-
Ultra Lean Burn Technology (ULB)
ULB technology uses an advanced control system, a better turbo sdfamatch, improved air and fuel mixing, and a more sophisticated sdfscombustion recipe to provide:
- Lowest engine-out emissions
- Highest fuel efficiency
- Improved altitude and speed turndown
- Stable load acceptance and load rejection
-
Emissions
- Meets U.S. EPA Spark Ignited Stationary NSPS emissions for 2010 and some non-attainment areas
- Lean air/fuel mixture provides best available emissions and fuel efficiency for engines of this bore size
-
Advanced Digital Engine Management
ADEM A3 engine management system integrates speed control, air/fuel ratio control, and ignition/detonation controls into a complete engine management system. ADEM A3 has improved: user interface, display system, shutdown controls, and system diagnostics.
-
Full Range of Attachments
Large variety of factory-installed engine attachments reduces packaging time
-
Testing
Every engine is full-load tested to ensure proper engine performance
-
Gas Engine Rating Pro
GERP is a web-based program designed to provide site performance capabilities for Cat® natural gas engines for the gas compression industry. GERP provides engine data for your site’s altitude, ambient temperature, fuel, engine coolant heat rejection, performance data, installation drawings, spec sheets, and pump curves.
-
Product Support Offered Through Global Cat Dealer
- More than 2,200 dealer outlets
- Cat factory-trained dealer technicians service every aspect of your petroleum engine
- Cat parts and labor warranty
- Preventive maintenance agreements available for repair sdfsbefore-failure options
- S•O•SSM program matches your oil and coolant samples sdfdagainst Caterpillar set standards to determine:-Internal engine component condition-Presence of unwanted fluid-Presence of combustion by-products-Site-specific oil change interval
-
Web Site
For all your Oil & Gas power requirements, visit www.cat.com/oilandgas
Specifications
Units for specifications
Engine Specifications
Maximum Rating | 1725 BHP 1286 bkW |
---|---|
Rated Speed | 1400 rpm 1400 rpm |
Emissions | Lean Burn: EPA NSPS Site Compliant Capable with Customer Supplied Aftertreatment, 0.5 g/bhp-hr NOx |
Minimum Rating | 1680.0 BHP 1253.0 bkW |
Displacement | 5263 in³ 86 l |
Aspiration | Turbocharged - 2 stage Aftercooled |
Oil Change Interval | 2000 hours |
Flywheel Teeth | 183 |
Length | 162 in 4113 mm |
Width | 74 in 1883 mm |
Height | 93 in 2361 mm |
Weight - Dry | 23776 lb 10785 kg |
Bore | 6.7 in 170 mm |
Rotation from Flywheel End | Counterclockwise |
Stroke | 7.5 in 190 mm |
Combustion | Lean Burn |
Capacity for Liquids
Lube Oil System - Refill | 143 gal (US) 541 l |
---|
Governor and Protection
Governor and Protection | Electronic (ADEM™ A3) |
---|
Standard Equipment
Air Inlet System
- Axial flow air cleaners
- Air inlet adapter
- Single element canister type with service indicator
Charging System
- Alternator
- Upper RH Accessory Drive
Control System
- ADEM A3 system
- HMI Panel
Cooling System
- Aftercooler thermostats and housing
- Inlet Flange Connection
- Jacket water thermostats and housing
- JW and SCAC engine driven pumps
Exhaust System
- Exhaust Manifold
- Exhaust Outlet
- Exhaust Weld Flange
- Hard Shielded turbine housing and turbine in lines
- Integrated Temperature Sensing Module
Flywheels & Flywheel Housings
- Flywheel housing SAE No. 00
- Flywheel SAE No. 21-double weight
Fuel System
- Electronic fuel metering valve
- Electronic fuel metering valve
- Gas pressure regulator
General
- Paint
Lube System
- Oil Cooler
- Air Prelube Pump
- Crankcase Breathers
- Drain Valve
- Oil Filter, RH
- Oil Pan, capacity 160 gallon
- Oil Sampling Valve
- Turbo Oil Accumulator
Mounting System
- Rails
Power Take-offs
- Accessory Drives
- Crankshaft Pulley
- Damper and Damper Guard
Starting System
- Starter
- Engine Barring Device
Telematics System
- Interconnect Harness
- Interconnect Harness
Optional Equipment
Exhaust System
- Exhaust Expanders
- Flexible Exhaust Fitting
Fuel System
- Fuel Filter
- Gas shut-off valve
General
- Language Decals
- Service Tools
Lube System
- Lubricating Oil
Power Take-offs
- Front Stub Shaft
Protection System
- Crankcase explosion relief valves
Starting System
- Jacket Water heater
Telematics System
- Cat connect technology
- Cell - satellite radio
- LAN Adapter
- Product Link Extension Harness