Features
- 
											A3 ECU - AdvantagesCAN J1939 data link Waterproof connectors, Maintenance-free, Backup ECU for redundant governing 
- 
											A3 ECU - Electronic AdvantagesLoad feedback, Programmable droop, Adjustable gain, Adjustable fuel/air ratio control, Histograms of engine operation, Cat Messenger display presents diagnostics and other engine parameters 
- 
											A3 ECU - Data Advantages through J1939 LinkEngine speed, Boost pressure, Throttle position, Fuel consumption rate, Inlet manifold temperature, Diagnostic codes and events, Configuration, Desired engine speed, Battery voltage, Engine load, Lifetime totals — engine hours, fuel burned, idle fuel, idle hours, Trip totals — average fuel rate, idle fuel, idle hours, engine hours, fuel burned, trip reset 
- 
											Customer Interface PanelInterfaces with standard Cat® Marine Monitoring System (PLC in Price List) Provides visual indication of ECU functionality, Accepts 4 — 20 mA or PWM remote throttle speed input, Marine alarm and protection 
- 
											Electronic Unit Injectors“Drop-in” installation, No threaded fuel connections, High pressure inside injector only, Does not require double wall fuel lines or leak collection device, Injector synchronization not required 
Specifications
Units for specifications
Power Rating
| Power Range | 1730 - 5420 bkW | 
|---|---|
| Minimum Rating | 2320.0 BHP 1730.0 bkW | 
| Maximum Rating | 7268 BHP 5420 bkW | 
Generator Set Specifications
| Frequency | 50 / 60 | 
|---|
Engine Specifications
| Emissions | U.S. EPA Tier 4 | 
|---|---|
| Aspiration | Turbocharged - Aspirator | 
| Bore | 11.0 in 280.0 mm | 
| Stroke | 11.8 in 300.0 mm | 
| Configuration | In-Line 6, V 8, V 12, V 16, 4-Stroke-Cycle Diesel | 
Dimensions & Weights
| Maximum Width | 69.0 in 1741.0 mm | 
|---|---|
| Minimum Height | 108.0 in 2733.0 mm | 
| Minimum Dry Weight | 34496.0 lb 15680.0 kg | 
| Maximum Height | 140.0 in 3550.0 mm | 
| Minimum Width | 67.0 in 1704.0 mm | 
| Minimum Length | 145 in 3691 mm | 
| Maximum Length | 197 in 5007 mm | 
| Maximum Dry Weight | 62832.0 lb 28500.0 kg | 
Standard Equipment
General
- LH and RH service availability
Air Inlet System
- Aftercooler, fresh water, corrosion resistant coated (air side)
- Dual turbochargers, rear-mounted, engine oil lubricated
- Crankcase breathers, top mounted
- Air inlet adapter - Straight / 90 degree / 35 degree
Control System
- Dual Caterpillar ADEM A4 Electronic Engine Control Modules
- Rigid Wiring Harness
Cooling System
- Aftercooler/Oil cooler and jacket water gear driven pumps
- Engine coolant water drains
- Engine coolant water drains
- Engine coolant water drains
- Single Circuit / Separate Circuit Aftercooler
Exhaust System
- Dry exhaust manifold
- Turbo speed sensors - Overspeed protection
Fuel System
- Fuel transfer pump, gear driven
- Electronically Controlled Unit Injectors
- Duplex Fuel filters
Instrumentation
- Cat Alarm & Protection System
Lube System
- Oil pump, gear driven
- Duplex centrifugal oil filter, engine mounted
- Wet sump
- Prelube pump - air / electric
Protection System
- Crankcase explosion relief valves
Optional Equipment
Fuel System
- SOLAS shielding
Lube System
- SOLAS shielding
Protection System
- Mounted oil mist detector
- Cylinder pressure relief valves