Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.
Features
-
Cat Diesel Engine
-
SR5 Alternator
-
Worldwide Product Support
-
Full Range of Attachments
Specifications
Units for specifications
Generator Set Specifications
| Maximum Rating | 2688 kVA |
|---|---|
| Minimum Rating | 1775 kVA |
| Emissions/Fuel Strategy | Low Fuel Consumption |
| Frequency | 50 Hz |
| Speed | 750 & 1000 rpm |
| Duty Cycle | Continuous |
Engine Specifications
| Engine Model | 3606 I-6, 4-Stroke Water-Cooled Diesel |
|---|---|
| Bore | 11 in 280 mm |
| Stroke | 11.8 in 300 mm |
| Displacement | 6762 in³ 111 l |
| Compression Ratio | 13:01 |
| Aspiration | TA |
| Fuel System | Direct unit injection |
| Governor Type | Generator Set Monitoring System (GMS) |
Generator Set Dimensions
| Length - Maximum | 404 in 10261.7 mm |
|---|---|
| Width - Maximum | 99.62 in 2530.3 mm |
| Height - Maximum | 156.6 in 3977.7 mm |
| Dry Weight - Genset (maximum) | 74970 lb 34070 kg |
Standard Equipment
Air Inlet System <!-- 3600 series only -->
- Breather, crankcase, top-mounted
- Air inlet shutoff
- Turbocharger, watercooled (750 rpm and HFO), engine oil lubricated
- Aftercooler, fresh water, corrosion resistant coated (air side)
Cooling System
- Water temperature regulator
- Engine coolant water drains
- Jacket water thermostats
Exhaust System
- 457 mm (18 in) Cat bolt pattern
- Dry, gas tight, exhaust manifold
- Includes adapter, flexible exhaust fitting
Fuel System
- Simplex or duplex
Generator System
- Custom generator per generator data sheet completed by dealer
Governor System
- UG Actuator
Lube System
- Oil pressure regulating valve
- Wet oil sump. Includes engine-driven main lubrication and oil pumps, oil lines and oil pan
- Oil filler and dipstick
- Crankcase explosion relief valves
- Service side engine mounted on cylinder block inspection covers
- Centrifugal oil filters with single shutoff
Mounting System
- Damper, torsional vibration
- Engine and generator mounting
Starting / Charging System
- One motor, engine mounted at rear, on left side
- Vane type air starter
- Air silencer
- Line group for single point custom connection
General:
- Paint, Caterpillar yellow
- Gear driven pumps: Fuel/oil/jacket water/Aftercooler/Oil cooler water
Optional Equipment
Air Inlet System
- Boost control valve
- Soot filter
- Heavy duty air cleaner
- Air inlet adapter
- Vertical support bracket
- Air cleaner louver assembly
- Air cleaner
Cooling System
- Expansion tank
- Auxiliary water pump
- Cooling system aids
- Heating aids
Exhaust System
- Weld flange and related hardware
- Flexible exhaust fittings
Fuel System
- Fuel system connections
- Duplex primary fuel strainer
- Fuel priming pump
Generator System
- Class F insulation
- 3 Phase, six Leads, WYE
- Anti-condensation space heaters
- Winding temperature detectors
- Busbar connections
Governor System
- Electronic/actuators
- Digital programmers
- 2301 A load share
- EGB actuator
- Battery backup/power supply
- 723 Plus
Lube System
- Oil pan drain valve
- Lube ANSI adapter (Emergency connection)
Mounting System
- Non-vertically restrained
- Spring type vibration isolators
- Vertically restrained
- Isolator
Starting / Charging System
- Compressed air flex hose
- Pressure reducing valve
General:
- Custom paint colors