SG36 Stump Grinder
- Required Hydraulics
- High Flow XPS
- Cutting Wheel Diameter - With Teeth
- 21.5 in
- Cutting Depth - Below Ground
- 20.5 in
Cat® Stump Grinders are designed to economically remove stumps in residential, commercial and agricultural settings. They offer increased production over tow-behind grinders in situations where multiple stump removal is required. The right balance of cutting wheel speed and torque makes quick work of most tree varieties.
Features
-
Application
Designed to economically remove stumps in residential, commercial and agricultural settings. Offers increased production over tow-behind grinders in situations where multiple stump removal is required.
-
Drive System
Direct drive system features a variable speed, unidirectional, gerotor style motor for optimal cutting wheel speed and high torque for efficient grinding performance.
-
Heavy Duty Cutting Wheel
Heavy-duty cutting wheel and 32 bolt-on and replaceable carbide teeth provide maximum durability and cutting efficiency.
-
Adjustability
Adjustable cutting wheel swing, extension and depth for superior operator control.
-
Hydraulic Controls
Swing and extension are controlled hydraulically from the operator’s compartment using an electro-hydraulic valve for greater productivity and swing cycle time efficiency.
-
Dual Height Pivoting Stand Feet
Heavy-duty, dual height, pivoting stand feet provide a stable platform when grinding. Feet are adjustable to compensate for specific machine coupler-to-ground height and tire diameters.
Specifications
Units for specifications
General
Required Hydraulics | High Flow XPS |
---|---|
Cutting Wheel Diameter - With Teeth | 21.5 in 547 mm |
Cutting Depth - Below Ground | 20.5 in 521 mm |
Cutting Head Extension | 11 in 280 mm |
Cutting Head Speed at Maximum Flow | 1230 rpm |
Cutting Head Swing Range | 70 degrees |
Cutting Height - Above Ground | 18.5 in 470 mm |
Cutting Wheel Width - With Teeth | 3.3 in 83 mm |
Cutting Width - Full Swing Range | 60 in 1524 mm |
Drive Method | Gerotor Motor- Direct |
Drive Shaft Torque at Maximum Pressure | 345.9 lb/ft 469 N·m |
Motor Displacement | 6.1 in³ 100 cm³ |
Optimal Hydraulic Pressure | 207-310 bar (3000-4500 psi) |
Overall Height | 32 in 813 mm |
Overall Length | 68.4 in 1737 mm |
Overall Width | 46.3 in 1175 mm |
Optimal Hydraulic Flow | 95-125 L/min (25-33 gpm) |
Weight | 881.8 lb 400 kg |
Number of Carbide Teeth per Cutting Wheel | 32 |
Videos
-
Cat® Stump Grinder Attachment at Work -
Cat® Stump Grinder Operating Tips -
Cat® Stump Grinder Overview -
An Attachment for Every Job - Cat® Work Tool Attachments