Cat® Multi V-Plows Buckets for Cat Skid Steer Loaders, Compact Track Loaders and Compact Wheel Loaders are a versatile attachment for snow removal applications with the capability to hydraulically angle 5 different blade configurations. Push, plow, sweep, or scoop snow and ice to clear surfaces and restore safe passage to driveways, sidewalks, parking lots, and roadways.

Studio Shot
Front View
Top View
Left View
Rear View
Bottom View
Right View
Cat V-Plow Cutting Through Snow
Cat V-Plow Moving Snow In Angle Blade Setup
Cat V-Plow Pushing Snow in Scoop Setup

Features

  • Curved Moldboard

    Curved Moldboard

    Curved moldboard design rolls and folds the snow while windrowing, minimizing snow clinging to its surface and spilling over the top.

  • Adjustable Skid Plates

    Adjustable Skid Plates

    Adjustable skid plates reduce the chances of gouging plowed surface and allow for improved operator control and maintains a constant cutting edge depth.

  • Blade Float

    Blade Float

    Blade float allows the plow the ability to pivot up to five degrees about the plow frame allowing the blade to follow surface contours and plow more efficiently.

  • Adjustable Trip Edges

    Adjustable Trip Edges

    Adjustable trip edges are incorporated into the base of each wing. Sectioned off moldboard springs back upon contact with unseen obstacles minimizing risk of damage to the v-plow and machine.

  • Bolt-On Serrated Step

    Bolt-On Serrated Step

    Bolt-On serrated step provides safe and ergonomic access to machine cab that is replaceable if damaged.

  • V (scoop mode) Blade Configuration

    V (scoop mode) Blade Configuration

    V (scoop mode) blade configuration pushes, collects, piles high or holds snow for removal to another area for final clean up.

  • V (plow mode) Blade Configuration

    V (plow mode) Blade Configuration

    V (plow mode) blade configuration quickly cuts initial pathway through deep, hard packed snow piles and drifts.

  • Right/Left Angled Blade Configuration

    Right/Left Angled Blade Configuration

    Right/Left angled blade configuration quickly and easily windrows snow to the designated side of the machine.

  • Straight Blade Configuration

    Straight Blade Configuration

    Straight blade configuration provides maximum width for piling and stacking snow high and clearing light snow cove.

Specifications

Units for specifications

General

Straight Width 60 in 1524 mm
Angled Width 53 in 1346 mm
Interface Type Skid Steer Coupler
V-Width - Scoop Mode 54 in 1372 mm
V-Width - Plow Mode 58.4 in 1483 mm
Weight 639.3 lb 290 kg
Blade Height 29 in 737 mm
Overall Height 32.5 in 826 mm
Length 52 in 1320 mm
Hydraulic Angling - Left/Right of Center ±35 Degrees
Float ±5 Degrees
Optimal Hydraulic Flow 57-76 lpm (15-20 gpm)
Optimal Hydraulic Pressure 150-230 bar (2176-3340 psi)
Trip Edge Quantity 2
Trip Edge Type Steel
Trip Edge Height 4 in 101 mm
Trip Edge Pivot Height 3.3 in 83 mm
Required Hydraulics Standard Flow

Videos

  • Cat® Multi V-Plow at Work
  • Cat® Multi V-Plow Features
  • Cat® Snow Removal | Attachments at Work
Front View

Documents