View quote list

S308 Mobile Scrap & Demolition Shear

Tip Force
43.3 Sh Ton
Rotation
360 Degrees
Jaw Opening
9.4 in

Ideal for interior demolition tasks, the compact S305 mounted on a Cat® Skid Steer Loader or Mini Excavator goes where no other demolition tool can. Remove conduits, wiring and interior fixtures.

Studio Shot
Front View
Top View
Left View
Rear View
Bottom View
Right View

Features

  • Jaw Design

    Jaw Design

    Unique straight lower jaw design effectively enhances the cutting force by facilitating the spreading out of steel along the length of the jaw, maximizing the shear cutting force.

  • 360° Rotation

    360° Rotation

    Operator can spin the shear 360 degrees in either direction to quickly position the jaws for a cut.

  • Reversible Knives

    Reversible Knives

    The five main, side and front knives are fully reversible with four effective cutting edges.

  • Easy Maintenance

    Easy Maintenance

    Large access panels on the top and bottom of the shear housing make it easier to service inside components.

  • Protected Cylinder

    Protected Cylinder

    Design of the shear housing and cylinder rod guarding provides full protection of the cylinder throughout the complete cutting cycle.

  • Jaw Lockout Pin

    Jaw Lockout Pin

    Included with every shear to provide confidence that working in the jaw area is safe.

  • Speed Valve

    Speed Valve

    Provides optimum flow regeneration to improve cycle times and machine productivity.

  • Mounting Options

    Mounting Options

    Mounting options for the S308 Shear include a skid steer loader mounting bracket, a 7/8/9 ton stick mount, and a 5/6 ton boom mount bracket.

  • Included Service Kit

    Included Service Kit

    Each shear comes included with a service kit and tool box.

Specifications

Units for specifications

General

Tip Force 43.3 Sh Ton 385 kN
Rotation 360 Degrees
Jaw Opening 9.4 in 240 mm
Jaw Depth 11.4 in 290 mm
Jaw Width - Moving 2.4 in 60 mm
Jaw Width - Fixed 9.1 in 230 mm
Cycle Time - Close 2.5 Seconds
Cycle Time - Open 3.5 Seconds
Rotation Circuit - Maximum Flow 5.3 gal/min 20 l/min
Rotation Circuit - Maximum Relief Pressure 2900.8 psi 20000 kPa
Cutting Circuit - Maximum Flow 15.9 gal/min 60 l/min
Cutting Circuit - Maximum Relief Pressure 3626 psi 25000 kPa
Throat Force 203.7 Sh Ton 1812 kN
Apex Force 73.4 Sh Ton 653 kN
Weight 1212.5 lb 550 kg
Height 26.3 in 667 mm
Length 67.3 in 1709 mm
Width 15.4 in 390 mm

Videos

  • Cat® S308 Shear at Work
  • An Attachment for Every Job - Cat® Work Tool Attachments
Front View

Documents