Cat® Demolition & Sorting Grapples are designed for fast, productive material handling. Capable of high-volume, production loading and precise sorting, they enhance the productivity and efficiency of your operation. The grapples can handle anything from primary and secondary demolition to recycling to get the job done.

Studio Shot
Front View
Top View
Left View
Rear View
Bottom View
Right View

Features

  • Vertically Perforated Side Plates

    Vertically Perforated Side Plates

    Better load visibility and easier positioning. Plates are hardened to HB450 standards providing higher wear resistance.

  • Specially Designed Pins

    Specially Designed Pins

    Oversized pins have high resistance against torque forces and increased durability. Grooved bushings allow for easy greasing.

  • Optimally Designed Linkage

    Optimally Designed Linkage

    Minimal height increase when opening and closing. Optimal cylinder guidance ensures high clamp forces during closing.

  • Oversized Cylinder with Load Holding Valve

    Oversized Cylinder with Load Holding Valve

    Ensures even, high clamping force to prevent loss of load. Load holding valve keeps clamp force constant even when maneuvering grapple or machine to ensure controlled load movement.

  • Slim Design

    Slim Design

    Easier maneuvering within building construction or containers in demolition and recycling applications. Optimal jumper lines routing avoids damage.

  • Robust Bolt-on Cutting Edge

    Robust Bolt-on Cutting Edge

    Provides high wear lifetime. Plow bolts utilize recessed nuts and are fully protected.

  • High Displacement Motor

    High Displacement Motor

    Robust hydraulic design maximizes rotation torque and optimizes rotation speed.

  • Widest Frame in Class

    Widest Frame in Class

    Strong design protects internal components from debris damage.

  • Oval Service Access Panels

    Oval Service Access Panels

    Easy service through two access panels; one on front and one on back.

Specifications

Units for specifications

General

Grapple Area 8.5 ft³ 240 l
Weight 1084.7 lb 492 kg
Machine Class 7-10 Ton Mini Excavators
Maximum Jaw Opening 55.3 in 1404 mm
Outer Wrapper Thickness 0.2 in 6 mm
Overall Width (Jaws Open) 61.5 in 1562 mm
Interface Type S45, S50, CW10, Pin On, Pin Lock
Overall Width (Jaws Closed) 34.4 in 875 mm
Overall Height (Jaws Open) 40.7 in 1033 mm
Overall Height (Jaws Closed) 47.4 in 1205 mm
Overall Depth 27.6 in 700 mm
Required Hydraulics 2nd Auxiliary
Edge Material HB500 Equivalent
Optimal Hydraulic Flow Grab 131 L/min (35 gpm) | Rotation 33 L/min (9 gpm)
Maximum Closing Force 4.9 Sh Ton 44 kN

Videos

  • Cat® G308 Demolition and Sorting Grapple Overview
Front View

Documents