1627 mm (64 in) Fusion™ Coupler Log & Lumber Fork Carriage
- Interface Type
- Fusion™ Coupler
- Tine Configuration
- Swinging, Floating
- Height
- 74 in
Cat® Log & Lumber Fork Carriages are used to load, unload, move deck, sort and feed the mill. Their flat fork tines and raised guards are designed specifically for use in handling both unfinished logs and stacked lumber.
Features
-
Application
Cat® Log & Lumber Fork Carriages are used to load, unload, move deck, sort and feed the mill. Their flat fork tines and raised guards are designed specifically for use in handling both unfinished logs and stacked lumber.
-
Risers / Log Guards
Risers and Log guards prevent logs from rolling back on to linkages. Maximizes the ability to fill the fork at every pass by supporting large loads.
-
Wider Carriages
Wider carriages increase stability when handling longer poles/loads.
-
Wider Tine Widths
Wider tine widths provide a larger surface area for stability when transporting larger materials.
-
Swinging / Non-swinging Tine Configuration
Forks can be configured to allow the tines to either swing or stay in a fixed position, using common hand tools.
-
Floating / Non-floating Tine Configuration
Easily interchange floating and non floating tine configurations by adding/removing a single bolt.
Specifications
Units for specifications
General
Interface Type | Fusion™ Coupler |
---|---|
Tine Configuration | Swinging, Floating |
Height | 74 in 1880 mm |
Weight | 1455 lb 660 kg |
Width | 67.1 in 1705 mm |
Length | 20.5 in 520 mm |
Tine Spacing | 942-1487 mm (37-59 in) |
Videos
-
Cat® Log & Lumber Forks at Work -
Cat® Log & Lumber Fork Features -
Cat® Forks Attachment at Work -
Cat® Forks for Small Wheel Loaders Overview -
An Attachment for Every Job - Cat® Work Tool Attachments