1500 mm (60 in), 460 L (16.2 ft3) Pin On (Pin Grabber) Tilting Ditch Cleaning Bucket With 60 mm (2.4 in) Pin Bores
- Width
- 60 in
- Capacity
- 16.2 ft³
- Weight
- 1239 lb
Tilting Ditch Cleaning Buckets for Cat® Mini Excavators are ideal for cleaning wide trenches, loading materials, slope cutting, grading and finishing work in construction, landscaping and road maintenance applications.
Features
-
Dual Cylinder Design
Dual horizontally positioned hydraulic cylinders provide short, smooth cycle times and maximize tilt momentum. The bucket can tilt 45 degrees left or right of center.
-
Standard Bolt-On Cutting Edge
One piece, replaceable and reversible, bolt-on, hardened cutting edge delivers long life and high performance.
-
Two Torque Tubes
Two torque tubes provide stronger support for the side edges, as well as an extra rigid and stable bucket design.
-
Drain Holes
Standard drain holes allow water drainage from the bucket when working in mucky, wet conditions.
-
Visual Tilt Indicator
Visual indicator allows operator to easily see from the cab of the machine if the bucket is horizontal.
-
Spill Guards
Two spill guards help prevent material from flowing over bucket into cylinders and causing damage.
-
Bucket Support Ribs
Two bucket stiffeners from top torque tube to base edge provides additional support during backwards grading, as well as overall bucket longevity.
-
Integrated Rear Cutting Edge
Rear torque tube doubles as a rear cutting edge, allowing for back dragging applications.
-
Included Mounting Pins
Includes standard machine mounting pins.
Specifications
Units for specifications
General
Width | 60 in 1500 mm |
---|---|
Capacity | 16.2 ft³ 460 l |
Weight | 1239 lb 562 kg |
Base Edge Thickness | 1 in 25 mm |
Cutting Edge Thickness | 1 in 25 mm |
Tip Radius | 43.8 in 1112 mm |
Required Hydraulics | 1st Auxiliary |
Interface Type | Pin On (Pin Grabber) |