2023 CAT 232D3 1,262 engine hrs
Condition
| GENERAL COMMENTS |
|---|
| CHECK PRODUCT LINK | ||
|---|---|---|
| CHECK WITH CUSTOMER FOR OPERATOR COMPLAINTS | ||
| DOWNLOAD MACHINE FAULT CODES | ||
| IS MACHINE EQUIPPED WITH PL? | ||
| IS PL ACTIVATED? | ||
| IS PL FUNCTIONING PROPERLY? | ||
| LISTEN FOR UNUSUAL NOISES | ||
| OBSERVE ENGINE EXHAUST COLORS | ||
| PERFORM SAFETY/PREPARATORY INSPECTION | ||
| PREPARE THE MACHINE FOR THE INSPECTION |
| BOGIE AXLES (MTL) | ||
|---|---|---|
| BOGIE WHEELS (MTL) | ||
| CHAIN DRIVE (SSL) | ||
| DRIVE CHAIN TENSION (SSL) | ||
| IDLER AXLES (FRONT AND REAR) (MTL) | ||
| IDLER WHEELS (FRONT AND REAR) (MTL) | ||
| RUBBER TRACKS (MTL) | ||
| SPROCKETS (MTL) | ||
| TIRES AND RIMS (SSL) | Cuts in tires | |
| TRACK DRIVE FRAME AND/OR MACHINE FRAME (MTL/SSL) | ||
| TRACK DRIVES (MTL) | ||
| TRACK TENSIONER (MTL) |
| AIR CLEANER ASSEMBLY | ||
|---|---|---|
| BATTERY AND BATTERY CABLES | ||
| BELTS, COMPRESSOR CLUTCH, AND PULLEYS | ||
| CAB EXTERIOR | ||
| CAB INTERIOR | ||
| CYLINDER HEAD AND VALVE COVER | ||
| ENGINE ACCESS DOOR | ||
| ENGINE MOUNTS | ||
| ENGINE OIL PAN | ||
| ENGINE WIRING HARNESS | ||
| EXHAUST MANIFOLD | ||
| FAN GUARD AND FAN | ||
| FUEL PRIMING PUMP, FUEL LINES, AND FUEL INJECTION PUMP | ||
| HORN AND/OR BACKUP ALARM | ||
| HYDROSTATIC PUMP AND MOTOR COMPARTMENT (MUST TILT CAB FOR ACCESS) | ||
| RADIATOR AND RADIATOR GUARD TILT MECHANISMS | ||
| RADIATOR CAP | ||
| RADIATOR GUARD | ||
| RADIATOR HOSES AND OIL COOLER LINES | ||
| RADIATOR, OIL COOLER, CONDENSER | ||
| STEPS AND HANDRAILS | ||
| TURBO CHARGER | ||
| WATER PUMP | ||
| WORK LIGHTS |
| AREA AROUND LIFT ARMS | ||
|---|---|---|
| BUCKET | ||
| BUCKET TIPS AND ADAPTERS | ||
| COUPLER | Coupler pin bolts and ears bent. No affect on operation | |
| COUPLER CYLINDER | ||
| CUTTING EDGES | Bucket in used condistion and has wear on it. Welded on edge. | |
| LIFT CYLINDER | ||
| TILT CYLINDERS |
| AIR QUALITY | ||
|---|---|---|
| ALTITUDE | ||
| AMBIENT TEMPERATURE | ||
| HAUL ROAD CONDITION | ||
| HAUL ROAD GRADE | ||
| HUMIDITY | ||
| MACHINE UTILIZATION | ||
| MAINTENANCE PRACTICES | ||
| PRIMARY INDUSTRIES | ||
| UNDERFOOT CONDITIONS | ||
| WORKING MATERIAL |
| CYLINDER DRIFT TEST (MAXIMUM ALLOWABLE MOVEMENT AFTER 1 MINUTE) | ||
|---|---|---|
| HYDRAULIC COUPLER SPEED TEST | ||
| LIFT CYLINDER SPEED TEST | ||
| OPERATION OF TWO SPEED FUNCTION TEST: MACHINE SPEED DECREASES WHEN FAST MODE IS DEACTIVATED | ||
| OPERATION OF TWO SPEED FUNCTION TEST: MACHINE SPEED INCREASES WHEN FAST MODE IS ACTIVATED | ||
| TILT CYLINDER SPEED TEST | ||
| TRACKING OF MACHINE (DRIFT) TEST (MAXIMUM ALLOWABLE DRIFT AFTER 30.5M (100FT) OF TRAVEL |
Comments
Features