Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.
Features
-
Cat Diesel Engine
-
Generator
-
World Wide Product Support
-
Full Range of Attachments
Specifications
Units for specifications
Generator Set Specifications
| Maximum Rating | 5320 ekW |
|---|---|
| Minimum Rating | 3350 ekW |
| Emissions/Fuel Strategy | Low Fuel Consumption |
| Frequency | 60 Hz |
| Speed | 720 & 900 rpm |
| Duty Cycle | Prime, Continuous |
Engine Specifications
| Engine Model | 3616 V-16,4-Stroke Water-Cooled Diesel |
|---|---|
| Bore | 11 in 280 mm |
| Stroke | 11.8 in 300 mm |
| Displacement | 18032 in³ 296 l |
| Compression Ratio | 13:01 |
| Aspiration | TA |
| Fuel System | Direct unit injection |
| Governor Type | Generator Set Monitoring System (GMS) |
Generator Set Dimensions
| Length - Maximum | 404 in 10261.7 mm |
|---|---|
| Width - Maximum | 99.62 in 2530.3 mm |
| Height - Maximum | 156.6 in 3977.7 mm |
| Dry Weight - Genset (maximum) | 141840 lb 64470 kg |
Standard Equipment
Air Inlet System <!-- 3600 series only -->
- Air cleaner
- Aftercooler, fresh water, corrosion resistant coated (air side)
- Breather, crankcase, top-mounted
- Turbocharger, watercooled, engine oil lubricated
- Air inlet shutoff
Cooling System
- Three-bundle oil cooler
- Jacket water thermostats
- Water temperature regulator
- Engine coolant water drains
- Front Mounted turbos
Exhaust System
- Dry, gas tight, exhaust manifold
- 457 mm (18 in) Cat bolt pattern
- Includes adapter, flexible exhaust fitting
Fuel System
- Simplex or duplex
Generator System
- Custom generator per generator data sheet completed by dealer
Governor System
- UG Actuator
Lube System
- Service Side Engine mounted on Cylinder Block Inspection Covers
- Centrifugal oil filters with single shutoff
- Oil filler and dipstick
- Oil pressure regulating valve
- Wet oil sump. Includes engine-driven main lubrication and oil pumps, oil lines and oil pan
- Crankcase explosion relief valves
Mounting System
- Damper, torsional vibration
- Engine and generator mounting
Starting / Charging System
- Line group for single point custom connection
- Two Motors, engine mounted at rear, on left side
- Air silencer
- Vane type air starter
General:
- Gear driven pumps: Fuel/oil/jacket water/Aftercooler/Oil cooler water
- Paint, Caterpillar yellow
Optional Equipment
Air Inlet System
- Heavy duty air cleaner
- Soot filter
- Boost control valve
- Vertical support bracket
- Air Inlet Adapter
- Air cleaner louver assembly
Cooling System
- Cooling system aids
- Auxiliary water pump
- Heat exchanger for single circuit
- Expansion tank
- Heating aids
Exhaust System
- Flexible exhaust Fittings
- Weld flange and related hardware
Fuel System
- Duplex Primary Fuel Strainer
- Fuel priming pump
- Fuel system connections
Generator System
- 3 Phase, Six Leads, WYE
- Anti-condensation space heaters
- Winding temperature detectors
- Busbar connections
- Class F insulation
Governor System
- 723 Plus
- Electronic/actuators
- EGB actuator
- Digital programmers
- 230 UA
- Battery backup/power supply
Lube System
- Lube ANSI Adapter (Emergency connection)
- Oil pan drain valve
Mounting System
- Isolator
- Non-vertically Restrained
- Vertically Restrained
- Spring type vibration isolators
Starting / Charging System
- Pressure reducing valve
- Compressed air flex hose
- Turbine type air starters
- Redundant air starters
General:
- Custom paint colors