View quote list

2134 mm (84 in) Construction Fork Carriage

Height
43.1 in
Width
84 in
Tine Spacing
270-1924 mm (10.6-76 in) centerline to centerline

Cat® Construction Fork Carriages for Small Wheel Loaders are wider than pallet fork carriages and are designed for heavy duty applications. Fork tines can be configured to allow tines to either swing or stay in a fixed position.

Studio Shot
Front View
Top View
Left View
Rear View
Bottom View
Right View

Features

  • Heavy Duty Design and High Backs

    Heavy Duty Design and High Backs

    This heavy duty carriage was specially designed to deliver performance at construction sites, moving palletized and large materials around. The high backs and good visibility through the frame make it happen.

  • Swinging Forks Capability

    Swinging Forks Capability

    In some operations, swinging forks helps to pick materials out of the ground. This carriage offers this option by just removing the lower bar and placing at the special storage located at the bottom of the carriage.

  • Adjustable Fork Positions

    Adjustable Fork Positions

    Adjust the fork position a total of 855 mm (33.7 in) from one side to the other with increments of 55 mm (2.2 in) and lock them to prevent non-expected movements.

  • Positioning Lever

    Positioning Lever

    Use the included red lever located at the right rear storage area to move your forks with safety and convenience.

Specifications

Units for specifications

General

Height 43.1 in 1095 mm
Width 84 in 2134 mm
Tine Spacing 270-1924 mm (10.6-76 in) centerline to centerline
Weight 1148.6 lb 521 kg
Length 14.4 in 366 mm
Interface Type Fusion™ Coupler