Skip to main content Skip to navigation
AgAgriculture Blog IconBehind the Scenes Blog IconConstruction Blog IconEquipment Maintenance Blog IconPower Systems Blog IconThumbs Down Thumbs Up! Small Business Blog IconTachnology Blog IconConstructioncontrol-smallcost-smallefficiency-smallflexibility-smallHoursHours Location HoursMapMapMenu AgMenu AttachmentsMenu BlogMenu CareersMenu ChecklistMenu ConstructionMenu MaintenanceMenu NewMenu PowerMenu RebuildsMenu RentMenu ServiceMenu TechnologyMenu TestimonialsMenu TrainingMenu Truck Menu UsedNewArtboard 1Parts Phone PhonePower Systemsproductivity-smallRentalRepSafetyServiceSpecialsTechToolsTrainingTruckUsed

Ziegler CAT

930M Ag Handler Small Wheel Loader

The Cat® 930M Ag Handler sets a new standard for productivity, fuel efficiency and comfort. A high torque, low speed C7.1 engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. A power boost in Range 1 for silage work maximizes productivity, while a boost in Range 4 gets you to the farm or field faster. Extremely low sound levels, large spacious cab and intuitive controls keep you working comfortably all day and even all night! Experience this industry benchmark.

Brand: Caterpillar

Photos

Videos

  • Safety and Service Overview | Cat® 930M Ag Handler
  • Key Features and Benefits | Cat® 930M Ag Handler
  • Características y beneficios clave | Cat® 930M Ag Handler
  • 930M Ag Handler Overview
  • 930M Ag Handler at Work
  • Product Performance Customer Testimonials | Cat® 930M Ag Handler
  • Customer Support Testimonials | Cat® 930M Ag Handler
  • Customer Testimonials | Cat® 930M Ag Handler
  • Kick-Outs, Snubbing, Wrap-Out and Soft Detents | M Series Small Wheel Loader Operator Tips
  • Secondary Display Navigation | M Series Small Wheel Loader Operator Tips
  • Preventative Maintenance | M Series Small Wheel Loader Operator Tips
  • Coded Start Feature/Individual Operator Profiles | M Series Small Wheel Loader Operator Tips
  • Creeper Control | M Series Small Wheel Loader Operator Tips
  • Rim Pull | M Series Small Wheel Loader Operator Tips
  • Efficient Hystat Operation | M Series Small Wheel Loader Operator Tips
  • Throttle Lock | M Series Small Wheel Loader Operator Tips
  • Fine Mode Control and Perfect Parallelism | M Series Small Wheel Loader Operator Tips
  • Quick Steer | M Series Small Wheel Loader Operator Tips
  • Power Train Modes | M Series Small Wheel Loader Operator Tips
  • Cab Controls and Features | M Series Small Wheel Loader Operator Tips
  • Hydro-mechanical Applications | M Series Small Wheel Loader Operator Tips
  • Third and Fourth Auxiliary Flow | M Series Small Wheel Loader Operator Tips
  • Reversing Fan | M Series Small Wheel Loader Operator Tips
  • Customize Your Experience | M Series Small Wheel Loader Operator Tips
  • Differential Lock | M Series Small Wheel Loader Operator Tips
  • Cat® Production Measurement (CPM) | M and K Series Small Wheel Loader Operator Tips
  • Cat® Production Measurement (CPM) Updates | M and K Series Small Wheel Loader Operator Tips
  • Tire Pressure Monitoring System | M Series Small Wheel Loader Operator Tips
  • Tire Pressure Monitoring System Updates | M Series Small Wheel Loader Operator Tips
  • Engine Idle Shutdown | M and K Series Small Wheel Loader Operator Tips
  • Continuously Adjustable Creep Mode | M and K Series Small Wheel Loader Operator Tips
  • Operator ID and Machine Security | M and K Series Small Wheel Loader Operator Tips
  • Diesel Exhaust Fluid (DEF) Fill Alarm | M Series Small Wheel Loader Operator Tips

360° View

Exterior

360° Exterior view. Double click on the image to zoom in on any area of the product.

Interior

360° Interior view. Double click on the image to zoom in on any area of the product.

Specifications

  • Engine
    SpecValue
    Rated Net Power - 1,600 rpm - SAE J1349 at Maximum Fan Speed (Standard Power Mode; Speed Range 1-3*) 141 HP
    Maximum Gross Power - ISO 14396 (Standard Power Mode: Range 1-3*) 160 HP
    Rated Net Power - 1,600 rpm - ISO 9249 (DIN) (Standard Power Mode: Speed Range 1-3*) 158 HP
    Engine Model Cat® C7.1
    Maximum Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*) 1600 r/min
    Rated Net Power - 1,600 rpm - SAE J1349 (Standard Power Mode: Speed Range 1-3*) 154 HP
    Maximum Gross Power - ISO 14396 (DIN) (Standard Power Mode: Range 1-3*) 162 HP
    Maximum Gross Power 170 HP
    Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4) 592 ft·lbf
    Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Performance Power Mode; Speed Range 1-4) 572 ft·lbf
    Displacement (Standard Power Mode: Speed Range 1-3*) 427 in³
    Rated Net Power - 1,800 rpm - SAE J1349 (Performance Power Mode: Speed Range 1-4) 157 HP
    Maximum Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4) 1800 r/min
    Displacement (Performance Power Mode: Speed Range 1-4) 427 in³
    Rated Net Power - 1,800 rpm - ISO 9249 (DIN) (Performance Power Mode: Speed Range 1-4) 162 HP
    Emissions Engine meets U.S. EPA Tier 4 Final emission standards.
    Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Standard Power Mode; Speed Range 1-3*) 572 ft·lbf
    Rated Net Power - 1,800 rpm - SAE J1349 at Maximum Fan Speed (Performance Power Mode; Speed Range 1-4) 143 HP
    Maximum Net Torque - SAE J1349 (Standard Power Mode; Speed Range 1-3*) 566 ft·lbf
    Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*) 592 ft·lbf
    Maximum Gross Power - ISO 14396 (DIN) (Performance Power Mode: Range 1-4) 170 HP
    Note (2) Spark arrester performance as standard – Meets the performance requirements of EN 1834-1.2000 (section 6.4.2 Visual Test) and U.S. Forestry Service SAE J350.
    Note (3) *Range 4 power is boosted to be the same as Performance Mode.
    Maximum Gross Power - ISO 14396 (Performance Power Mode: Range 1-4) 168 HP
    Note (1) Net power shown is the power available at the flywheel when the engine is equipped with alternator, air cleaner and diesel exhaust filter.
    Maximum Net Torque - SAE J1349 (Performance Power Mode; Speed Range 1-4) 566 ft·lbf
  • Buckets
    SpecValue
    Bucket Capacities 3.1-5.0 m3 (4.0-6.5 yd3)
    Bucket Capacities - Light Material 3.1-5.0 m3 (4.0-6.5 yd3)
  • Weights
    SpecValue
    Operating Weight 31876 lb
  • Cab
    SpecValue
    ROPS ISO 3471:2008
    FOPS ISO 3449:2005 Level II
    Note (2) *The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
    Note (1) The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, are: – Standard cab: 68 ±3 dB(A) – Deluxe cab: 66 ±2 dB(A)
  • Dimensions and Operating Specifications (Approximate) - 3.5 m³ (4.6 yd³) Bucket
    SpecValue
    Reach - Bucket at 45°* 4.67 ft
    Turning Radius - Inside of Tires 9.33 ft
    Rack Angle at Full Lift 51 degrees
    Dump Angle at Full Lift 44 degrees
    Departure Angle 33 degrees
    Breakout* 17246 lb
    Tipping Load - Straight - ISO 14397-1* 16070 lb
    Clearance - Level Bucket** 13.33 ft
    Clearance - Bucket at 45° * 10.17 ft
    Length - Wheel Base 9.83 ft
    Width - Over Tires 8.33 ft
    Rack Angle at Carry 48 degrees
    Length - Overall* 27.58 ft
    Width - Bucket 9 ft
    Length - Hitch to Front Axle 4.92 ft
    Turning Radius - Outside of Tires 17.67 ft
    Articulation Angle 40 degrees
    Dig Depth** 5.3 in
    Clearance - Loadover Height** 11.58 ft
    Turning Radius - Over Bucket 21.92 ft
    Height - Ground to Beacon** 12.08 ft
    Height - Overall** 19 ft
    Operating Weight* 32136 lb
    Carry Height - Bucket Pin 2 ft
    Tipping Load - Full Turn - ISO 14397-1* 13592 lb
    Height - Ground to Cab** 10.92 ft
    Height - Bucket Pin** 14.42 ft
    Width - Tread Center 6.25 ft
    Length - Rear Axle to Bumper 6.5 ft
    Note (2) **Vary with tire.
    Height - Ground Axle Center** 2.17 ft
    Note (1) *Vary with bucket.
    Height - Ground Clearance** 1.25 ft
    Note (3) Dimensions listed are for a 930M Ag Handler High Lift configured with Fusion™ light material bucket, bolt-on cutting edge, logger/aggregate counterweights, additional guarding, 80 kg (176 lb) operator and Michelin 20.5 R25 (L-3) XHA2 tires.
  • Loader Hydraulic System
    SpecValue
    Relief Pressure - Tilt Cylinder 4351 psi
    Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Total Cycle Time 8.2 s
    Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Total Cycle Time 7.5 s
    Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure 4061 psi
    Maximum Flow - Implement Pump 50 gal/min
    Maximum Flow - Implement Pump - 4th Function Maximum Flow* 42 gal/min
    Maximum Flow - Implement Pump - 3rd Function* 50 gal/min
    Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Dump, at Maximum Lift Height 1.6 s
    Note *Adjustable from 20% to 100% of maximum flow through the secondary display, when equipped.
    Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Float Down, Maximum Lift to Ground Level 1.8 s
    Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Float Down, Maximum Lift to Ground Level 1.8 s
    Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure 4061 psi
    Maximum Working Pressure - Implement Pump 4061 psi
    Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Raise, Ground Level to Maximum Lift 4.3 s
    Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Dump, at Maximum Lift Height 1.4 s
    Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Raise, Ground Level to Maximum Lift 4.8 s
  • Steering
    SpecValue
    Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left 3.5 turns
    Steering Cycle Times - Full Left to Full Right - At 1,800 rpm: 90 rpm Steering Wheel Speed 2.4 s
    Maximum Steering Torque - 40° (Full Turn) 27747 ft·lbf
    Maximum Flow - Steering Pump 34 gal/min
    Maximum Steering Torque - 0° (Straight Machine) 37155 ft·lbf
    Maximum Working Pressure - Steering Pump 3500 psi
    Steering Articulation Angle - Each Direction 40°
  • Tires
    SpecValue
    Standard Size 20.5 R25, radial (L-3)
    Note (3) Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
    Note (2) In certain applications, the loader's productive capabilities may exceed the tire's tonnes-km/h (ton-mph) capabilities.
    Note (1) Other tire choices are available. Contact your Cat dealer for details.
    Other Choices Include 20.5 R25, radial (L-2); 20.5-25 12PR (L-2); 20.5-25 12PR (L-3)
  • Dimensions and Operating Specifications (Approximate) - 3.1 m³ (4.1 yd³) Bucket
    SpecValue
    Dig Depth** 5.3 in
    Height - Bucket Pin** 14.42 ft
    Tipping Load - Straight - ISO 14397-1* 16430 lb
    Turning Radius - Over Bucket 20.92 ft
    Length - Overall* 27.25 ft
    Clearance - Level Bucket** 13.33 ft
    Height - Ground Clearance** 1.25 ft
    Height - Overall** 18.67 ft
    Clearance - Bucket at 45° * 10.42 ft
    Rack Angle at Carry 48 degrees
    Note (2) **Vary with tire.
    Breakout* 18808 lb
    Length - Wheel Base 9.83 ft
    Dump Angle at Full Lift 44 degrees
    Operating Weight* 31876 lb
    Width - Tread Center 6.25 ft
    Length - Rear Axle to Bumper 6.5 ft
    Reach - Bucket at 45°* 4.42 ft
    Height - Ground Axle Center** 2.17 ft
    Width - Over Tires 8.33 ft
    Articulation Angle 40 degrees
    Width - Bucket 9 ft
    Tipping Load - Full Turn - ISO 14397-1* 13934 lb
    Turning Radius - Inside of Tires 9.33 ft
    Rack Angle at Full Lift 51 degrees
    Turning Radius - Outside of Tires 17.67 ft
    Carry Height - Bucket Pin 2 ft
    Clearance - Loadover Height** 11.58 ft
    Height - Ground to Beacon** 12.08 ft
    Height - Ground to Cab** 10.92 ft
    Note (1) *Vary with bucket.
    Length - Hitch to Front Axle 4.92 ft
    Departure Angle 33 degrees
    Note (3) Dimensions listed are for a 930M Ag Handler High Lift configured with Fusion™ light material bucket, bolt-on cutting edge, logger/aggregate counterweights, additional guarding, 80 kg (176 lb) operator and Michelin 20.5 R25 (L-3) XHA2 tires.
  • Service Refill Capacities
    SpecValue
    Transmission - Gear Box 2.2 gal (US)
    Cooling System 7.9 gal (US)
    Diesel Exhaust Fluid (DEF) Tank 5 gal (US)
    Fuel Tank 51.5 gal (US)
    Axles - Rear 6.6 gal (US)
    Hydraulic System - Including Tank 43.6 gal (US)
    Engine Crankcase 5.3 gal (US)
    Axles - Front 6.9 gal (US)
    Hydraulic Tank 23.8 gal (US)
    Note DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
  • Transmission
    SpecValue
    Forward and Reverse - Range 1* 1-13 km/h (0.6-8 mph)
    Forward and Reverse - Range 2 8 mile/h
    Forward and Reverse - Range 4 25 mile/h
    Note *Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display, when equipped. Factory default is 7 km/h (4.4 mph).
    Forward and Reverse - Range 3 17 mile/h
  • Axles
    SpecValue
    Rear Oscillating ±11 degrees; Open differential (standard); Limited slip differential (optional)
    Front Fixed; Locking differential (standard)