Skip to main content Skip to navigation
AgAgriculture Blog IconBehind the Scenes Blog IconConstruction Blog IconEquipment Maintenance Blog IconPower Systems Blog Icon Thumbs Down Thumbs Up! Small Business Blog IconTachnology Blog IconConstructioncontrol-smallcost-smallefficiency-smallflexibility-smallHoursHours Location HoursMapMapMenu AgMenu AttachmentsMenu BlogMenu Blog Menu CareersMenu ChecklistMenu ConstructionMenu MaintenanceMenu NewMenu PowerMenu RebuildsMenu RentMenu ServiceMenu TechnologyMenu TestimonialsMenu Training Menu Truck Menu UsedNewArtboard 1Parts Phone PhonePower Systemsproductivity-smallRentalRepSafetyServiceSpecialsTechtestimonial-iconToolsTrainingTruckUsed

Ziegler CAT

Caterpillar

Cat® C4.4 Diesel Engine

Maximum Power

200 HP

Maximum Torque

609 lb-ft @ 1400 rpm

Emissions

U.S. EPA & CARB Tier 4 Final, EU Stage V

Overview

The Cat® C4.4 Industrial Diesel Engine is offered in ratings ranging from 82-150 bkW (109-200 bhp) @ 2200 rpm, which meet U.S. EPA Tier 4 Final, EU Stage V emission standards. Industries and applications powered by C4.4 engines include: Agriculture, Aerial Lifts, Aircraft Ground Support, Bore/Drill Rigs, Chippers/Grinders, Compactors/Rollers, Compressors, Construction, Cranes, Crushers, Feller Bunchers, Forestry, Forklifts, General Industrial, Harvesters, Hydraulic Power Units, Irrigation Equipment, Loaders/Forwarders, Material Handling, Mining, Mobile Earthmoving Equipment, Mobile Sweepers, Paving Equipment, Pumps, Skidders, Specialty Ag Equipment, Sprayers, Trenchers, Turf and Landscaping and Underground Mining Equipment.

Photos

360° View

Exterior

360° Exterior view. Double click on the image to zoom in on any area of the product.

Features

Specifications

  • Power Rating
    Spec Value
    Maximum Power 200 HP
    Maximum Torque 609 lb-ft @ 1400 rpm
    Rated Speed 2200 rpm
    Minimum Power 109 HP
  • Emission Standards
    Spec Value
    Emissions U.S. EPA & CARB Tier 4 Final, EU Stage V
  • General
    Spec Value
    Engine Configuration Inline 4, 4-Stroke-Cycle Diesel
    Bore 4.1 in
    Stroke 5 in
    Displacement 268.5 in³
    Compression Ratio 16.5:1
    Aspiration Turbocharged Aftercooled (TA) or Series Turbocharged Aftercooled (TTA)
    Combustion System Direct Injection
    Rotation from Flywheel End Counterclockwise
    Aftertreatment DOC+DPF+SCR
  • Engine Dimensions - Approximate
    Spec Value
    Length 32.4 in
    Width 29.6 in
    Height 35.3 in
    Weight - Net Dry - Basic Operating Engine Without Optional Attachments 1180 lb
  • Aftertreatment Dimensions
    Spec Value
    Length 26.5 in
    Width 24.5 in
    Height 17.8 in
    Weight 143.3 lb

Standard Equipment

Air Inlet System

  • Standard air cleaners

Control System

  • Full electronic control system, all connectors and wiring looms waterproof and designed to withstand harsh off-highway environments
  • Flexible and configurable software features and well-supported SAE J1939 CAN bus enables highly integrated machines

Cooling System

  • Top tank temperature 108° C (226° F) as standard to minimize cooling pack size
  • 50:50 water glycol mix

Flywheels and Flywheel Housing

  • Fitted with SAE3 configuration as standard

Fuel System

  • Electronic high pressure common rail
  • Innovative filter design to ensure maximum protection of the engine

Lube System

  • Wide choice of sumps for different applications

Power Take Off

  • SAE A and SAE B flanges on left-hand side. Additional SAE A flange available on left-hand side. Engine power can also be taken from the front of the engine on some applications. Factory fitted compressors are also available.

General

  • Available with or without a balancer
  • Paint: Caterpillar yellow, with optional colors available at request

U.S. EPA Tier 4 Final, EU Stage V Aftertreatment/ Clean Emissions Control Equipment

  • Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
  • Selective Catalytic Reduction (SCR)
  • 3" flex pipe connection with straight, 45°, and 90° options for flexibility