Cat® Electric Rope Shovels combine immense payload capability with low maintenance requirements and high reliability to deliver the lowest cost-per-ton loading solution for long-life mines. The Cat 7495 HF with HydraCrowd features AC IGBT electrics for greater uptime, lower operating costs and faster cycle times. Its high-flotation undercarriage designed for the oil sands ensures low ground-pressure for improved digging and loading in poor underfoot conditions. The state-of-the-art operator’s cab is the most comfortable and productivity-enhancing in the industry. The 7495 HF is available with a number of new technologies that provide operator assist and machine self-protection, enable proactive maintenance, and deliver real-time information on productivity and performance. An entirely electric machine, the 7495 HF is cleaner and more efficient than diesel-powered machines, plus its regenerative braking technology feeds electrical energy back to the grid.
Caterpillar
7495 HF Electric Rope Shovel
Overview
Photos
Videos
360° View
Exterior
360° Exterior view. Double click on the image to zoom in on any area of the product.
Interior
360° interior view. Double click on the image to zoom in on any area of the product.
Showroom
View the 7495 Virtual Product Tour
Specifications
-
Dimensions
Spec Value Dipper Payload 120 t Dipper Capacity 30.6-62.7 m3 (40-82 yd3) Dipper Payload (Available Dipper Payloads Up To 109 Tonnes [120 tons] When Specified) 120 t Note Dependent on application and material density -
Weights
Spec Value Working Weight - With Dipper and Standard Links 3164000 lb Ballast - Furnished By Customer 667150 lb Note (1) These weights will vary slightly depending upon dipper and optional equipment selection Note (2) All specifications are based on a 45 m3 (59 yd3) dipper and standard 317.5 cm (125 in) crawlers. -
Main Structures
Spec Value Planetary Propel Dual-motor independent drive Swing Two planetary gearboxes, each driven by a vertically mounted motor, are located on either side of the revolving frame. Dual-output pinion shafts from each gearbox engage the swing rack. Crawler Dimensions - Overall Width 317.5 cm (125 in) Treads 41.67 in Hoist A planetary gearbox with dual-output pinions provides the hoist torque transfer from the electric motor to the hoist drum gear. Ground Bearing Pressure - Note Ground bearing pressure is dependent upon many factors Upper Works Overall Width - Including Standard Walkways 41.99 in Ground Bearing Pressure - Total Effective Bearing Area (317.5 cm/125 in) Treads 57 m2 (248 kPa); 614 ft2 (36 psi) -
Lube System
Spec Value Type Automatic, single-line system for open gear lubricant and grease Components (1) Six pumps (four for open gear lubricant and two for grease) located in an insulated, heated, double-walled lube room Components (2) External fast fill from lower level -
Electrical
Spec Value Drive IGBT Acutrol drive system System Voltage - Nominal 50/60 Hz, 7,200V Power Requirements - Voltage 3 phase, 50/60 Hz, 7,200V Note Other voltage options available to suit customer requirements Power Requirements - 50 Hz 6,000V, 6,600V, 7,200V, 11,000V Power Requirements - 60 Hz 7,200V, 13,800V Power Requirements - Peak power 3778 kW Power Requirements - Average Power Demand 945-1322 kW -
Front End
Spec Value Rope Data - Note High impact ropes available as an option Rope Data - Hoist - No. 2 Rope Data - Hoist - Diameter 2.75 in Rope Data - Dipper Trip - No. 1 Rope Data - Boom Suspension - Diameter 3.25 in Components One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle. Rope Data - Dipper Trip - Diameter 0.75 in Rope Data - Boom Suspension - No. 4 Crowd (1) HydraCrowd, hydraulic power skid, located at the front center of the revolving frame deck, powers a large hydraulic cylinder to move the dipper handle fore and aft. Crowd (2) (Optional) Rope Crowd, the crowd machinery is located at the front center of the revolving frame, consisting of motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft. -
Dimensions - Working Ranges
Spec Value Operating Weight 3164000 lb Dipper Payload 120 ton (US) Maximum Dumping Height 29.53 ft Dipper Capacities 30.6-62.7 m3 (40-82 yd3) -
Dimensions (Approximate) - Optimal Working Ranges*
Spec Value Radius of Level Floor 55.77 ft Cutting Height - Maximum 55 ft Dumping Height - With Clearance to Open Dipper Door 29.53 ft Revolving Frame Tail Swing Radius 30.51 ft Cutting Radius - Maximum 79.72 ft Note (1) Optimal working ranges based on loading a Cat 797F truck. Note (2) *All specifications are based on a 45 m3 (59 yd3) dipper and standard 317.5 cm (125 in) crawlers.